lkml.org 
[lkml]   [2019]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ath10k: Fixed "Failed to wake target" QCA6174
Date
+ ath10k list

liupold <rohn.ch@gmail.com> writes:

> There is a issue with card about waking up during boot and from suspend
> the only way to prevent it (is seems) by making pci_ps = false,
> on Acer Swift 3 (ryzen 2500u).

Can you provide dmesg output when this problem happens? Was QCA6174
installed to Swift 3 by default at the factory or did you install it
afterwards on your own?

> Signed-off-by: liupold <rohn.ch@gmail.com>

Is 'liupold' your full legal name?

> ---
> drivers/net/wireless/ath/ath10k/pci.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
> index a0b4d265c6eb..653590342619 100644
> --- a/drivers/net/wireless/ath/ath10k/pci.c
> +++ b/drivers/net/wireless/ath/ath10k/pci.c
> @@ -3514,7 +3514,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
> case QCA6164_2_1_DEVICE_ID:
> case QCA6174_2_1_DEVICE_ID:
> hw_rev = ATH10K_HW_QCA6174;
> - pci_ps = true;
> + pci_ps = false;
> pci_soft_reset = ath10k_pci_warm_reset;
> pci_hard_reset = ath10k_pci_qca6174_chip_reset;
> targ_cpu_to_ce_addr = ath10k_pci_qca6174_targ_cpu_to_ce_addr;

This increases power consumption for all QCA6174 devices so I'm not
eager to do this.

--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2019-10-30 15:26    [W:0.027 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site