lkml.org 
[lkml]   [2019]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 0/5] net: ethernet: stmmac: some fixes and optimization
    From
    Date
    Hi Christophe

    On 9/20/19 7:38 AM, Christophe Roullier wrote:
    > Some improvements (manage syscfg as optional clock, update slew rate of
    > ETH_MDIO pin, Enable gating of the MAC TX clock during TX low-power mode)
    > Fix warning build message when W=1
    >
    > Christophe Roullier (5):
    > net: ethernet: stmmac: Add support for syscfg clock
    > net: ethernet: stmmac: fix warning when w=1 option is used during
    > build
    > ARM: dts: stm32: remove syscfg clock on stm32mp157c ethernet
    > ARM: dts: stm32: adjust slew rate for Ethernet
    > ARM: dts: stm32: Enable gating of the MAC TX clock during TX low-power
    > mode on stm32mp157c
    >

    DT patches will be applied on stm32-next after dwmac-stm32 patches merge
    in net-next.

    > arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++-
    > arch/arm/boot/dts/stm32mp157c.dtsi | 7 ++--
    > .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 42 ++++++++++++-------
    > 3 files changed, 38 insertions(+), 20 deletions(-)
    >

    \
     
     \ /
      Last update: 2019-10-03 12:17    [W:4.667 / U:0.200 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site