lkml.org 
[lkml]   [2019]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver
On Tue, 10 Sep 2019 at 03:39, Takao Orito <orito.takao@socionext.com> wrote:
>
> The following patches add driver for SD Host controller on
> Socionext's Milbeaut M10V platforms.
>
> SD Host controller on Milbeaut consists of two controller parts.
> One is core controller F_SDH30, this is similar to sdhci-fujitsu
> controller.
> Another is bridge controller. This bridge controller is not compatible
> with sdhci-fujitsu controller. This is special for Milbeaut series.
>
> It has the several parts,
> - reset control
> - clock enable / select for SDR50/25/12
> - hold control of DATA/CMD line
> - select characteristics for WP/CD/LED line
> - Re-tuning control for mode3
> - Capability setting
> Timeout Clock / Base Clock / Timer Count for Re-Tuning /
> Debounce period
> These requires special procedures at reset or clock enable/change or
> further tuning of clock.
>
> Takao Orito (2):
> dt-bindings: mmc: add DT bindings for Milbeaut SD controller
> mmc: sdhci-milbeaut: add Milbeaut SD controller driver
>
> .../devicetree/bindings/mmc/sdhci-milbeaut.txt | 30 ++
> drivers/mmc/host/Kconfig | 11 +
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-milbeaut.c | 362 +++++++++++++++++++++
> drivers/mmc/host/sdhci_f_sdh30.c | 26 +-
> drivers/mmc/host/sdhci_f_sdh30.h | 32 ++
> 6 files changed, 437 insertions(+), 25 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
> create mode 100644 drivers/mmc/host/sdhci-milbeaut.c
> create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h
>
> --
> 1.9.1
>
>

Applied for next, thanks!

Kind regards
Uffe

\
 
 \ /
  Last update: 2019-10-03 12:02    [W:0.069 / U:6.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site