lkml.org 
[lkml]   [2019]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: regulator: fixed: add off-on-delay-us property
Date
From: Peng Fan <peng.fan@nxp.com>

When disabling a fixed regulator, it may take some time to let the
voltage drop to the expected value, such as zero. If not delay
enough time, the regulator might have been always enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
Documentation/devicetree/bindings/regulator/fixed-regulator.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index a78150c47aa2..954130a8ccbe 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -50,6 +50,10 @@ properties:
description: startup time in microseconds
$ref: /schemas/types.yaml#/definitions/uint32

+ off-on-delay-us:
+ description: off delay time in microseconds
+ $ref: /schemas/types.yaml#/definitions/uint32
+
enable-active-high:
description:
Polarity of GPIO is Active high. If this property is missing,
--
2.16.4
\
 
 \ /
  Last update: 2019-10-29 02:22    [W:0.029 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site