lkml.org 
[lkml]   [2019]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v15 04/19] leds: multicolor: Introduce a multicolor class definition
From
Date
Jacek

On 10/28/19 2:22 PM, Jacek Anaszewski wrote:
> Dan,
>
> Thank you for the v15.
>
> On 10/28/19 7:36 PM, Dan Murphy wrote:
>> Introduce a multicolor class that groups colored LEDs
>> within a LED node.
>>
>> The multi color class groups monochrome LEDs and allows controlling two
>> aspects of the final combined color: hue and lightness. The former is
>> controlled via <color>_intensity files and the latter is controlled
>> via brightness file.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>> .../ABI/testing/sysfs-class-led-multicolor | 36 +++
>> Documentation/leds/index.rst | 1 +
>> Documentation/leds/leds-class-multicolor.rst | 100 +++++++
>> drivers/leds/Kconfig | 10 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/led-class-multicolor.c | 271 ++++++++++++++++++
>> include/linux/led-class-multicolor.h | 139 +++++++++
>> 7 files changed, 558 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor
>> create mode 100644 Documentation/leds/leds-class-multicolor.rst
>> create mode 100644 drivers/leds/led-class-multicolor.c
>> create mode 100644 include/linux/led-class-multicolor.h
>>
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor
>> new file mode 100644
>> index 000000000000..3d1f9d726c70
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor
>> @@ -0,0 +1,36 @@
>> +What: /sys/class/leds/<led>/brightness
>> +Date: Sept 2019
>> +KernelVersion: 5.5
>> +Contact: Dan Murphy <dmurphy@ti.com>
>> +Description: read/write
>> + Writing to this file will update all LEDs within the group to a
>> + calculated percentage of what each color LED intensity is set
>> + to. The percentage is calculated for each grouped LED via the
>> + equation below:
>> +
>> + led_brightness = brightness * <color>_intensity/<color>_max_intensity
>> +
>> + For additional details please refer to
>> + Documentation/leds/leds-class-multicolor.rst.
>> +
>> + The value of the color is from 0 to
>> + /sys/class/leds/<led>/max_brightness.
>> +
>> +What: /sys/class/leds/<led>/colors/<color>_intensity
>> +Date: Sept 2019
>> +KernelVersion: 5.5
>> +Contact: Dan Murphy <dmurphy@ti.com>
>> +Description: read/write
>> + The <color>_intensity file is created based on the color
>> + defined by the registrar of the class.
>> + There is one file per color presented.
>> +
>> + The value of the color is from 0 to
>> + /sys/class/leds/<led>/colors/<color>_max_intensity.
>> +
>> +What: /sys/class/leds/<led>/colors/<color>_max_intensity
>> +Date: Sept 2019
>> +KernelVersion: 5.5
>> +Contact: Dan Murphy <dmurphy@ti.com>
>> +Description: read only
>> + Maximum intensity level for the LED color.
>> diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
>> index 060f4e485897..bc70c6aa7138 100644
>> --- a/Documentation/leds/index.rst
>> +++ b/Documentation/leds/index.rst
>> @@ -9,6 +9,7 @@ LEDs
>>
>> leds-class
>> leds-class-flash
>> + leds-class-multicolor
>> ledtrig-oneshot
>> ledtrig-transient
>> ledtrig-usbport
>> diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst
>> new file mode 100644
>> index 000000000000..c8a224cead51
>> --- /dev/null
>> +++ b/Documentation/leds/leds-class-multicolor.rst
>> @@ -0,0 +1,100 @@
>> +====================================
>> +Multi Color LED handling under Linux
>> +====================================
>> +
>> +Description
>> +===========
>> +The multi color class groups monochrome LEDs and allows controlling two
>> +aspects of the final combined color: hue and lightness. The former is
>> +controlled via <color>_intensity files and the latter is controlled
>> +via brightness file.
>> +
>> +For more details on hue and lightness notions please refer to
>> +https://en.wikipedia.org/wiki/CIECAM02.
>> +
>> +Note that intensity files only cache the written value and the actual
>> +change of hardware state occurs upon writing brightness file. This
>> +allows for changing many factors of the perceived color in a virtually
>> +unnoticeable way for the human observer.
>> +
>> +Multicolor Class Control
>> +========================
>> +The multicolor class presents the LED groups under a directory called "colors".
>> +This directory is a child under the LED parent node created by the led_class
>> +framework. The led_class framework is documented in led-class.rst within this
>> +documentation directory.
>> +
>> +Each colored LED will have two files created under the colors directory
>> +<color>_intensity and <color>_max_intensity. These files will contain
>> +one of LED_COLOR_ID_* definitions from the header
>> +include/dt-bindings/leds/common.h.
>> +
>> +Directory Layout Example
>> +========================
>> +root:/sys/class/leds/rgb:grouped_leds# ls -lR colors/
> s/rgb/multicolor/ according to the led_colors[LED_COLOR_ID_MULTI].

Ack but this probably would not be multicolor either based on LED node
naming conventions.


>> +-rw-r--r-- 1 root root 4096 Jul 7 03:10 blue_intensity
>> +-r--r--r-- 1 root root 4096 Jul 7 03:10 blue_max_intensity
>> +-rw-r--r-- 1 root root 4096 Jul 7 03:10 green_intensity
>> +-r--r--r-- 1 root root 4096 Jul 7 03:10 green_max_intensity
>> +-rw-r--r-- 1 root root 4096 Jul 7 03:10 red_intensity
>> +-r--r--r-- 1 root root 4096 Jul 7 03:10 red_max_intensity
>> +
> [...]
>> +static int led_multicolor_init_color(struct led_classdev_mc *mcled_cdev,
>> + int color_id)
>> +{
>> + struct led_classdev *led_cdev = mcled_cdev->led_cdev;
>> + struct led_mc_color_entry *mc_priv;
>> + char *intensity_file_name;
>> + char *max_intensity_file_name;
>> + size_t len;
>> + int ret;
>> +
>> + mc_priv = devm_kzalloc(led_cdev->dev, sizeof(*mc_priv), GFP_KERNEL);
>> + if (!mc_priv)
>> + return -ENOMEM;
>> +
>> + mc_priv->led_color_id = color_id;
>> + mc_priv->mcled_cdev = mcled_cdev;
>> +
>> + sysfs_attr_init(&mc_priv->intensity_attr.attr);
>> + len = strlen(led_colors[color_id]) + strlen(INTENSITY_NAME) + 1;
>> + intensity_file_name = kzalloc(len, GFP_KERNEL);
>> + if (!intensity_file_name)
>> + return -ENOMEM;
>> +
>> + snprintf(intensity_file_name, len, "%s%s",
>> + led_colors[color_id], INTENSITY_NAME);
>> + mc_priv->intensity_attr.attr.name = intensity_file_name;
>> + mc_priv->intensity_attr.attr.mode = 0644;
>> + mc_priv->intensity_attr.store = intensity_store;
>> + mc_priv->intensity_attr.show = intensity_show;
>> + ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
>> + &mc_priv->intensity_attr.attr,
>> + led_color_group.name);
>> + if (ret)
>> + goto intensity_err_out;
>> +
>> + sysfs_attr_init(&mc_priv->max_intensity_attr.attr);
>> + len = strlen(led_colors[color_id]) + strlen(MAX_INTENSITY_NAME) + 1;
>> + max_intensity_file_name = kzalloc(len, GFP_KERNEL);
>> + if (!max_intensity_file_name) {
>> + ret = -ENOMEM;
>> + goto intensity_err_out;
>> + }
>> +
>> + snprintf(max_intensity_file_name, len, "%s%s",
>> + led_colors[color_id], MAX_INTENSITY_NAME);
>> + mc_priv->max_intensity_attr.attr.name = max_intensity_file_name;
>> + mc_priv->max_intensity_attr.attr.mode = 0444;
>> + mc_priv->max_intensity_attr.show = max_intensity_show;
>> + ret = sysfs_add_file_to_group(&led_cdev->dev->kobj,
>> + &mc_priv->max_intensity_attr.attr,
>> + led_color_group.name);
>> + if (ret)
>> + goto max_intensity_err_out;
>> +
>> + mc_priv->max_intensity = LED_FULL;
>> + list_add_tail(&mc_priv->list, &mcled_cdev->color_list);
> I still would prefer dynamically allocated array here. Also there are
> things I would see differently in the patch 13/19 as already discussed.
>
> Nonetheless I am giving my preliminary ack for this series just to
> give a hint to others to join the review.
>
Replies were given on the 13/19 patch.

Dan

\
 
 \ /
  Last update: 2019-10-28 20:38    [W:0.045 / U:1.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site