lkml.org 
[lkml]   [2019]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] dt-bindings: power: Introduce one property to describe the battery resistance with temperature changes
Date
Since the battery internal resistance can be changed as the temperature
changes, thus add one table to describe the battery resistance percent
in different temperature to get a accurate battery internal resistance.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
.../devicetree/bindings/power/supply/battery.txt | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
index 5c913d4c..1a6f951 100644
--- a/Documentation/devicetree/bindings/power/supply/battery.txt
+++ b/Documentation/devicetree/bindings/power/supply/battery.txt
@@ -35,6 +35,10 @@ Optional Properties:
for each of the battery capacity lookup table. The first temperature value
specifies the OCV table 0, and the second temperature value specifies the
OCV table 1, and so on.
+ - resistance-temp-table: An array providing the resistance percent and
+ corresponding temperature in degree Celsius, which is used to look up the
+ resistance percent according to current temperature to get a accurate
+ batterty internal resistance.

Battery properties are named, where possible, for the corresponding
elements in enum power_supply_property, defined in
@@ -61,6 +65,7 @@ Example:
ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
+ resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
};

charger: charger@11 {
--
1.7.9.5
\
 
 \ /
  Last update: 2019-10-28 08:20    [W:0.052 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site