Messages in this thread Patch in this message | | | From | "H. Nikolaus Schaller" <> | Subject | [PATCH v2 01/11] Documentation: dt: wireless: update wl1251 for sdio | Date | Sat, 19 Oct 2019 20:41:16 +0200 |
| |
The standard method for sdio devices connected to an sdio interface is to define them as a child node like we can see with wlcore.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> --- .../bindings/net/wireless/ti,wl1251.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt index bb2fcde6f7ff..88612ff29f2d 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt @@ -35,3 +35,29 @@ Examples: ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ }; }; + +&mmc3 { + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wl1251@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; +}; -- 2.19.1
| |