lkml.org 
[lkml]   [2019]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v1 2/3] tty: serial: lpuart: Use defines that correspond to correct register
Date
On Wed, 2019-10-16 at 22:22 +0200, Stefan Agner wrote:
> On 2019-10-16 17:18, Philippe Schenker wrote:
> > Use UARTMODIR defines instead of UARTMODEM as it is a 32-bit
> > function
>
> This reads a bit strange at first. Also it is helpful for later to
> state
> that this does not make a difference in practise, so how about:
>
> Use define from the 32-bit register description UARTMODIR_* instead of
> UARTMODEM_*. The value is the same, so there is no functional change.
>
> Otherwise looks good to me:
>
> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>

Thanks for your review and comment. And also thanks to Andy Duan for his
reviews!

You're right, I could have included that so it is clear that nothing is
changed. I will send a v2 today with your suggested commit message

Philippe

>
> --
> Stefan
>
> > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> > ---
> >
> > drivers/tty/serial/fsl_lpuart.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/tty/serial/fsl_lpuart.c
> > b/drivers/tty/serial/fsl_lpuart.c
> > index f3271857621c..346b4a070ce9 100644
> > --- a/drivers/tty/serial/fsl_lpuart.c
> > +++ b/drivers/tty/serial/fsl_lpuart.c
> > @@ -1879,10 +1879,10 @@ lpuart32_set_termios(struct uart_port *port,
> > struct ktermios *termios,
> > }
> >
> > if (termios->c_cflag & CRTSCTS) {
> > - modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
> > + modem |= (UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
> > } else {
> > termios->c_cflag &= ~CRTSCTS;
> > - modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
> > + modem &= ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
> > }
> >
> > if (termios->c_cflag & CSTOPB)
\
 
 \ /
  Last update: 2019-10-17 10:10    [W:0.115 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site