Messages in this thread Patch in this message | | | From | Dan Murphy <> | Subject | [PATCH v13 11/18] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes | Date | Wed, 16 Oct 2019 10:59:47 -0500 |
| |
Add the reg property to each channel node. This update is to accomodate the multicolor framework. In addition to the accomodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order.
Signed-off-by: Dan Murphy <dmurphy@ti.com> CC: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 4f6acbd8c040..8a873da102d3 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -56,16 +56,21 @@ reg = <0x33>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; @@ -75,15 +80,20 @@ reg = <0x34>; label = "lp5521_sec"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; -- 2.22.0.214.g8dca754b1e
| |