lkml.org 
[lkml]   [2019]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 1/2] net: phy: Use genphy_loopback() by default
Date
The standard way of putting a PHY device into loopback is most often
suitable for testing. This is going to be necessary in a subsequent
patch that adds RGII debugging capability using the loopback feature.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/phy/phy_device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9d2bbb13293e..c2e66b9ec161 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1514,7 +1514,7 @@ int phy_loopback(struct phy_device *phydev, bool enable)
if (phydev->drv && phydrv->set_loopback)
ret = phydrv->set_loopback(phydev, enable);
else
- ret = -EOPNOTSUPP;
+ ret = genphy_loopback(phydev, enable);

if (ret)
goto out;
--
2.17.1
\
 
 \ /
  Last update: 2019-10-16 00:50    [W:0.683 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site