lkml.org 
[lkml]   [2019]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 14/19] PM / devfreq: tegra30: Don't enable consecutive-down interrupt on startup
From
Date
On 19. 8. 12. 오전 6:23, Dmitry Osipenko wrote:
> The consecutive-down event tells that we should perform frequency
> de-boosting, but boosting is in a reset state on start and hence the
> event won't do anything useful for us and it will be just a dummy
> interrupt request.
>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> drivers/devfreq/tegra30-devfreq.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
> index 5002dca4c403..a0a1ac09a824 100644
> --- a/drivers/devfreq/tegra30-devfreq.c
> +++ b/drivers/devfreq/tegra30-devfreq.c
> @@ -708,7 +708,6 @@ static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
> << ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_NUM_SHIFT;
> val |= ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN;
> val |= ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN;
> - val |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
> val |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
> val |= ACTMON_DEV_CTRL_ENB;
>
>

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2019-10-02 02:00    [W:0.239 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site