lkml.org 
[lkml]   [2019]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: display: imx: fix native-mode setting
On Wed, Sep 18, 2019 at 09:38:53PM +0200, Martin Kaiser wrote:
> According to
> Documentation/devicetree/bindings/display/panel/display-timing.txt,
> native-mode is a property of the display-timings node.
>
> If it's located outside of display-timings, the native-mode setting is
> ignored and the first display timing is used.
>
> We've already fixed the board definitions which got this wrong. Fix the
> example in the imx framebuffer bindings as well.
>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)

Please also fix
Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

>
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> index e5a8b363d829..f4df9e83bcd2 100644
> --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> @@ -38,10 +38,10 @@ Example:
>
> display0: display0 {
> model = "Primeview-PD050VL1";
> - native-mode = <&timing_disp0>;
> bits-per-pixel = <16>;
> fsl,pcr = <0xf0c88080>; /* non-standard but required */
> display-timings {
> + native-mode = <&timing_disp0>;
> timing_disp0: 640x480 {
> hactive = <640>;
> vactive = <480>;
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2019-10-02 00:10    [W:2.482 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site