lkml.org 
[lkml]   [2019]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 1/5] dt-bindings: leds: Add pattern initialization from Device Tree
From
Date
Hi Krzysztof,

Thank you for the update.

Patch set looks good to me.

Now we're missing only ack from Rob for this patch.

Best regards,
Jacek Anaszewski

On 1/9/19 3:44 PM, Krzysztof Kozlowski wrote:
> Document new led-pattern property for initialization of LED triggers.
> The property format is trigger-specific (except being array of
> integers). For pattern trigger, the explanation of pattern format was
> moved to a common file shared with sysfs ABI.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> ---
> .../ABI/testing/sysfs-class-led-trigger-pattern | 51 ++--------------------
> Documentation/devicetree/bindings/leds/common.txt | 12 +++++
> .../bindings/leds/leds-trigger-pattern.txt | 49 +++++++++++++++++++++
> 3 files changed, 64 insertions(+), 48 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
>
> diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
> index 1e5d172e0646..bd92ef9d6faa 100644
> --- a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
> +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
> @@ -7,55 +7,10 @@ Description:
> timer. It can do gradual dimming and step change of brightness.
>
> The pattern is given by a series of tuples, of brightness and
> - duration (ms). The LED is expected to traverse the series and
> - each brightness value for the specified duration. Duration of
> - 0 means brightness should immediately change to new value, and
> - writing malformed pattern deactivates any active one.
> + duration (ms).
>
> - 1. For gradual dimming, the dimming interval now is set as 50
> - milliseconds. So the tuple with duration less than dimming
> - interval (50ms) is treated as a step change of brightness,
> - i.e. the subsequent brightness will be applied without adding
> - intervening dimming intervals.
> -
> - The gradual dimming format of the software pattern values should be:
> - "brightness_1 duration_1 brightness_2 duration_2 brightness_3
> - duration_3 ...". For example:
> -
> - echo 0 1000 255 2000 > pattern
> -
> - It will make the LED go gradually from zero-intensity to max (255)
> - intensity in 1000 milliseconds, then back to zero intensity in 2000
> - milliseconds:
> -
> - LED brightness
> - ^
> - 255-| / \ / \ /
> - | / \ / \ /
> - | / \ / \ /
> - | / \ / \ /
> - 0-| / \/ \/
> - +---0----1----2----3----4----5----6------------> time (s)
> -
> - 2. To make the LED go instantly from one brightness value to another,
> - we should use zero-time lengths (the brightness must be same as
> - the previous tuple's). So the format should be:
> - "brightness_1 duration_1 brightness_1 0 brightness_2 duration_2
> - brightness_2 0 ...". For example:
> -
> - echo 0 1000 0 0 255 2000 255 0 > pattern
> -
> - It will make the LED stay off for one second, then stay at max brightness
> - for two seconds:
> -
> - LED brightness
> - ^
> - 255-| +---------+ +---------+
> - | | | | |
> - | | | | |
> - | | | | |
> - 0-| -----+ +----+ +----
> - +---0----1----2----3----4----5----6------------> time (s)
> + The exact format is described in:
> + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
>
> What: /sys/class/leds/<led>/hw_pattern
> Date: September 2018
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index aa1399814a2a..70876ac11367 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -37,6 +37,18 @@ Optional properties for child nodes:
> "ide-disk" - LED indicates IDE disk activity (deprecated),
> in new implementations use "disk-activity"
> "timer" - LED flashes at a fixed, configurable rate
> + "pattern" - LED alters the brightness for the specified duration with one
> + software timer (requires "led-pattern" property)
> +
> +- led-pattern : Array of integers with default pattern for certain triggers.
> + Each trigger may parse this property differently:
> + - one-shot : two numbers specifying delay on and delay off (in ms),
> + - timer : two numbers specifying delay on and delay off (in ms),
> + - pattern : the pattern is given by a series of tuples, of
> + brightness and duration (in ms). The exact format is
> + described in:
> + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
> +
>
> - led-max-microamp : Maximum LED supply current in microamperes. This property
> can be made mandatory for the board configurations
> diff --git a/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
> new file mode 100644
> index 000000000000..d3696680bfc8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
> @@ -0,0 +1,49 @@
> +* Pattern format for LED pattern trigger
> +
> +The pattern is given by a series of tuples, of brightness and duration (ms).
> +The LED is expected to traverse the series and each brightness value for the
> +specified duration. Duration of 0 means brightness should immediately change to
> +new value, and writing malformed pattern deactivates any active one.
> +
> +1. For gradual dimming, the dimming interval now is set as 50 milliseconds. So
> +the tuple with duration less than dimming interval (50ms) is treated as a step
> +change of brightness, i.e. the subsequent brightness will be applied without
> +adding intervening dimming intervals.
> +
> +The gradual dimming format of the software pattern values should be:
> +"brightness_1 duration_1 brightness_2 duration_2 brightness_3 duration_3 ...".
> +For example (using sysfs interface):
> +
> +echo 0 1000 255 2000 > pattern
> +
> +It will make the LED go gradually from zero-intensity to max (255) intensity in
> +1000 milliseconds, then back to zero intensity in 2000 milliseconds:
> +
> +LED brightness
> + ^
> +255-| / \ / \ /
> + | / \ / \ /
> + | / \ / \ /
> + | / \ / \ /
> + 0-| / \/ \/
> + +---0----1----2----3----4----5----6------------> time (s)
> +
> +2. To make the LED go instantly from one brightness value to another, we should
> +use zero-time lengths (the brightness must be same as the previous tuple's). So
> +the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2
> +duration_2 brightness_2 0 ...".
> +For example (using sysfs interface):
> +
> +echo 0 1000 0 0 255 2000 255 0 > pattern
> +
> +It will make the LED stay off for one second, then stay at max brightness for
> +two seconds:
> +
> +LED brightness
> + ^
> +255-| +---------+ +---------+
> + | | | | |
> + | | | | |
> + | | | | |
> + 0-| -----+ +----+ +----
> + +---0----1----2----3----4----5----6------------> time (s)
>

\
 
 \ /
  Last update: 2019-01-09 21:45    [W:0.086 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site