lkml.org 
[lkml]   [2019]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64/hisilicon: fix SDcard detection
On Wed, 9 Jan 2019 at 19:28, Linus Walleij <linus.walleij@linaro.org> wrote:
>
> Hi Vincent!
>
> On Wed, Jan 9, 2019 at 7:01 PM Vincent Guittot
> <vincent.guittot@linaro.org> wrote:
>
> > commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> > has changed how cd_gpios phandle and cd-inverted are used to set gpio's flags.
> >
> > Since this change, hikey960 SDcard is not detected anymore because flags
> > are not set correctly. Updating cd-gpios to set GPIO_ACTIVE_LOW instead
> > of high, fixes the problem.
> >
> > Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
>
> Please check if this patch fixes your problem:
> https://marc.info/?l=linux-mmc&m=154637189021211&w=2

This fix the problem

>
> > --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> > +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> > @@ -582,7 +582,7 @@
> > sd-uhs-sdr104;
> > disable-wp;
> > cd-inverted;
> > - cd-gpios = <&gpio25 3 0>;
> > + cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
>
> This is also a good change, but the old device tree should
> continue to work so we need to fix the real bug.
>
> If you also remove "cd-inverted" above, this patch should
> hopefully still work and be fine to apply as well.

ok. I'm going to send an update

>
> Yours,
> Linus Walleij

\
 
 \ /
  Last update: 2019-01-09 20:10    [W:0.043 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site