lkml.org 
[lkml]   [2019]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] USB: Don't enable LPM if it's already enabled
On Mon, Dec 03, 2018 at 06:26:43PM +0800, Kai-Heng Feng wrote:
> USB Bluetooth controller QCA ROME (0cf3:e007) sometimes stops working
> after S3:
> [ 165.110742] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
> [ 168.432065] Bluetooth: hci0: Failed to send body at 4 of 1953 (-110)
>
> After some experiments, I found that disabling LPM can workaround the
> issue.
>
> On some platforms, the USB power is cut during S3, so the driver uses
> reset-resume to resume the device. During port resume, LPM gets enabled
> twice, by usb_reset_and_verify_device() and usb_port_resume().
>
> So let's enable LPM for just once, as this solves the issue for the
> device in question.
>
> Also consolidate USB2 LPM functions to usb_enable_usb2_hardware_lpm()
> and usb_disable_usb2_hardware_lpm().

I thought I asked for this to be two different patches. One that does
the "consolidation", and then one that fixes the bug. You are mixing
two different things here together, making it harder to review.

Can you please break this up and send a patch series, with the correct
"Fixes:" tag added to the second patch that actually fixes the issue?

thanks,

greg k-h

\
 
 \ /
  Last update: 2019-01-08 16:42    [W:0.074 / U:1.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site