lkml.org 
[lkml]   [2019]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 2/2] remoteproc: qcom: Add support for parsing fw dt bindings
Hi Brian,
Thanks for the review!

On 2019-01-04 05:14, Brian Norris wrote:
> On Fri, Dec 28, 2018 at 10:18:19AM +0530, Sibi Sankar wrote:
>> Add support for parsing "firmware-name" dt bindings which specifies
>> the relative paths of mba/modem/pas image as strings. Fallback to
>> the default paths for mba/modem/pas image on -EINVAL.
>>
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>> drivers/remoteproc/qcom_q6v5_mss.c | 46
>> +++++++++++++++++++++++-------
>> drivers/remoteproc/qcom_q6v5_pas.c | 11 ++++++-
>> 2 files changed, 46 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
>> b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 01be7314e176..c75179006e24 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -188,6 +188,7 @@ struct q6v5 {
>> bool has_alt_reset;
>> int mpss_perm;
>> int mba_perm;
>> + const char *hexagon_mdt_image;
>> int version;
>> };
>>
>> @@ -860,17 +861,27 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>> phys_addr_t min_addr = PHYS_ADDR_MAX;
>> phys_addr_t max_addr = 0;
>> bool relocate = false;
>> - char seg_name[10];
>> + char *fw_name;
>> + size_t fw_name_len;
>> ssize_t offset;
>> size_t size = 0;
>> void *ptr;
>> int ret;
>> int i;
>>
>> - ret = request_firmware(&fw, "modem.mdt", qproc->dev);
>> + fw_name_len = strlen(qproc->hexagon_mdt_image);
>> + if (fw_name_len <= 4)
>> + return -EINVAL;
>> +
>> + fw_name = kstrdup(qproc->hexagon_mdt_image, GFP_KERNEL);
>> + if (!fw_name)
>> + return -ENOMEM;
>> +
>> + ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
>> if (ret < 0) {
>> - dev_err(qproc->dev, "unable to load modem.mdt\n");
>> - return ret;
>> + dev_err(qproc->dev, "unable to load %s\n",
>> + qproc->hexagon_mdt_image);
>> + goto out;
>> }
>>
>> /* Initialize the RMB validator */
>> @@ -918,10 +929,12 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>> ptr = qproc->mpss_region + offset;
>>
>> if (phdr->p_filesz) {
>> - snprintf(seg_name, sizeof(seg_name), "modem.b%02d", i);
>> - ret = request_firmware(&seg_fw, seg_name, qproc->dev);
>> + snprintf(fw_name + fw_name_len - 3, fw_name_len,
>> + "b%02d", i);
>
> So, you're assuming that 'fw_name' ends in '.XXX' (for some 3-char
> value
> of 'XXX')? Seems a bit odd. But if you really want this, it feels like
> you should enforce this, and either comment on what you're doing or
> else
> use a proper computation that makes it clear (e.g., strlen("bin")).
>
> Brian

we want to construct the names of the fw blobs
incrementally i.e xxx.xxx to xxx.bxx. Given
that we restrict the fw_name_len to be greater
than 4 at the beginning, I'll probably do
something like this.

/* Replace "xxx.xxx" with "xxx.bxx" */
sprintf(fw_name + fw_name_len - 3, "b%02d", i);

>
>> + ret = request_firmware(&seg_fw, fw_name, qproc->dev);
>> if (ret) {
>> - dev_err(qproc->dev, "failed to load %s\n", seg_name);
>> + dev_err(qproc->dev, "failed to load %s\n",
>> + fw_name);
>> goto release_firmware;
>> }
>>
>> @@ -960,6 +973,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>>
>> release_firmware:
>> release_firmware(fw);
>> +out:
>> + kfree(fw_name);
>>
>> return ret < 0 ? ret : 0;
>> }
>> @@ -1075,9 +1090,10 @@ static int
>> qcom_q6v5_register_dump_segments(struct rproc *rproc,
>> unsigned long i;
>> int ret;
>>
>> - ret = request_firmware(&fw, "modem.mdt", qproc->dev);
>> + ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
>> if (ret < 0) {
>> - dev_err(qproc->dev, "unable to load modem.mdt\n");
>> + dev_err(qproc->dev, "unable to load %s\n",
>> + qproc->hexagon_mdt_image);
>> return ret;
>> }
>>
>> @@ -1253,6 +1269,8 @@ static int q6v5_probe(struct platform_device
>> *pdev)
>> const struct rproc_hexagon_res *desc;
>> struct q6v5 *qproc;
>> struct rproc *rproc;
>> + const char *mba_image;
>> + const char *fw_name[2];
>> int ret;
>>
>> desc = of_device_get_match_data(&pdev->dev);
>> @@ -1262,8 +1280,15 @@ static int q6v5_probe(struct platform_device
>> *pdev)
>> if (desc->need_mem_protection && !qcom_scm_is_available())
>> return -EPROBE_DEFER;
>>
>> + ret = of_property_read_string_array(pdev->dev.of_node,
>> "firmware-name",
>> + fw_name, 2);
>> + if (ret != -EINVAL && ret != 2)
>> + return ret > 0 ? -EINVAL : ret;
>> +
>> + mba_image = (ret != 2) ? desc->hexagon_mba_image : fw_name[0];
>> +
>> rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
>> - desc->hexagon_mba_image, sizeof(*qproc));
>> + mba_image, sizeof(*qproc));
>> if (!rproc) {
>> dev_err(&pdev->dev, "failed to allocate rproc\n");
>> return -ENOMEM;
>> @@ -1272,6 +1297,7 @@ static int q6v5_probe(struct platform_device
>> *pdev)
>> qproc = (struct q6v5 *)rproc->priv;
>> qproc->dev = &pdev->dev;
>> qproc->rproc = rproc;
>> + qproc->hexagon_mdt_image = (ret != 2) ? "modem.mdt" : fw_name[1];
>> platform_set_drvdata(pdev, qproc);
>>
>> ret = q6v5_init_mem(qproc, pdev);
>> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c
>> b/drivers/remoteproc/qcom_q6v5_pas.c
>> index b1e63fcd5fdf..141c7da29e9a 100644
>> --- a/drivers/remoteproc/qcom_q6v5_pas.c
>> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
>> @@ -258,6 +258,8 @@ static int adsp_probe(struct platform_device
>> *pdev)
>> const struct adsp_data *desc;
>> struct qcom_adsp *adsp;
>> struct rproc *rproc;
>> + const char *fw_name;
>> + const char *of_fw_name;
>> int ret;
>>
>> desc = of_device_get_match_data(&pdev->dev);
>> @@ -267,8 +269,15 @@ static int adsp_probe(struct platform_device
>> *pdev)
>> if (!qcom_scm_is_available())
>> return -EPROBE_DEFER;
>>
>> + ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
>> + &of_fw_name);
>> + if (ret && ret != -EINVAL)
>> + return ret;
>> +
>> + fw_name = ret ? desc->firmware_name : of_fw_name;
>> +
>> rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
>> - desc->firmware_name, sizeof(*adsp));
>> + fw_name, sizeof(*adsp));
>> if (!rproc) {
>> dev_err(&pdev->dev, "unable to allocate remoteproc\n");
>> return -ENOMEM;
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> Forum,
>> a Linux Foundation Collaborative Project
>>

--
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2019-01-08 11:33    [W:0.094 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site