lkml.org 
[lkml]   [2019]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 2/2] phy: ath79-usb: Fix the main reset name to match the DT binding
    Date
    I submitted this driver several times before it got accepted. The
    first series hasn't been accepted but the DTS binding did made it.
    I then made a second series that added generic reset support to the
    PHY core, this in turn required a change to the DT binding. This
    second series seemed to have been ignored, so I did a third one
    without the change to the PHY core and the DT binding update, and this
    last attempt finally made it.

    But two months later the DT binding update from the second series has
    been integrated too. So now the driver doesn't match the binding and
    the only DTS using it. This patch fix the driver to match the new
    binding.

    Signed-off-by: Alban Bedel <albeu@free.fr>
    ---
    drivers/phy/qualcomm/phy-ath79-usb.c | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c
    index f7d64f3910b4..09a77e556ece 100644
    --- a/drivers/phy/qualcomm/phy-ath79-usb.c
    +++ b/drivers/phy/qualcomm/phy-ath79-usb.c
    @@ -69,7 +69,7 @@ static int ath79_usb_phy_probe(struct platform_device *pdev)
    if (!priv)
    return -ENOMEM;

    - priv->reset = devm_reset_control_get(&pdev->dev, "usb-phy");
    + priv->reset = devm_reset_control_get(&pdev->dev, "phy");
    if (IS_ERR(priv->reset))
    return PTR_ERR(priv->reset);

    --
    2.19.1
    \
     
     \ /
      Last update: 2019-01-07 20:46    [W:3.524 / U:0.380 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site