lkml.org 
[lkml]   [2019]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/7] arm64: dts: msm: add PDC device bindings for sdm845
On Thu, Dec 20 2018 at 11:14 -0700, Doug Anderson wrote:
>Hi,
>
>On Wed, Dec 19, 2018 at 2:11 PM Lina Iyer <ilina@codeaurora.org> wrote:
>>
>> Add PDC interrupt controller device bindings for SDM845.
>>
>> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>> ---
>> Changes in v3:
>> - Fix PDC map, use GIC SPI port number for hwirq
>> Changes in v2:
>> - Order by address
>> ---
>> arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>
>nit: ${SUBJECT} makes it sounds like you're adding something into the
>"Documentation/devicetree/bindings" folder, but you're not. Also you
>probably want the prefix "qcom", not "msm" since it ends up in the
>"qcom" dir. Also, subject should say that this is the interrupt
>controller. How about:
>
>arm64: dts: qcom: add PDC interrupt controller for sdm845
>
>
Sure.

>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index b72bdb0a31a5..8e15392a6f64 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -1278,6 +1278,15 @@
>> #reset-cells = <1>;
>> };
>
>nit: the above node looks like the tail end of pdc reset controller.
>That has a unit address of b2e0000. Your unit address is smaller than
>the the pdc reset controller so you should be above it, not below it.
>
Ok.
>
>> + pdc: interrupt-controller@b220000 {
>
>nit: Maybe the label should be "pdc_intc" not just "pdc". This is
>just the node for the interrupt controller, not the whole pdc, right?
>
>
>> + compatible = "qcom,sdm845-pdc";
>> + reg = <0xb220000 0x30000>;
>
>nit: apparently common practice for Quaclomm dts is to pad the address
>in the "reg" field to all 8 digits. So the above should be:
>
>reg = <0x0b220000 0x30000>;
>
>NOTE: it's important to _not_ pad the unit address in the node name
>(so you got that right). Only update the "reg". For context:
>
Ok.

Will take care of these in the next spin.

Thanks,
Lina

>https://lkml.kernel.org/r/CAD=FV=WrvRH6QpaQ67yw2MFz8RP59ozkSfQC4+OAM_8fAbGZuw@mail.gmail.com
>
>
>-Doug

\
 
 \ /
  Last update: 2019-01-07 19:53    [W:0.068 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site