lkml.org 
[lkml]   [2019]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 07/17] drm/sun4i: sun6i_mipi_dsi: Refactor vertical video start delay
On Fri, Dec 21, 2018 at 2:26 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Tue, Dec 11, 2018 at 10:19 PM Maxime Ripard
> <maxime.ripard@bootlin.com> wrote:
> >
> > On Mon, Dec 10, 2018 at 09:47:19PM +0530, Jagan Teki wrote:
> > > Video start delay can be computed by subtracting total vertical
> > > timing with front porch timing and with adding 1 delay line for TCON.
> > >
> > > BSP code form BPI-M64-bsp is computing video start delay as
> > > (from linux-sunxi/
> > > drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
> > >
> > > u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp;
> > > => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp)
> > > => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y)
> > > - panel->lcd_y - (panel->lcd_vbp)
> > > => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y
> > > - panel->lcd_y - panel->lcd_vbp
> > > => timmings->ver_front_porch
> > >
> > > So, update the start delay computation accordingly.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> >
> > Even though it's a bit better now on my A33 board and I don't have the
> > white stripes on the bottom of the display, there's still some
> > flickering with your patches applied.
> >
> > Bisecting it seems to point at that patch, but reverting it doesn't
> > make the issue go away, so it's not really clear which one exactly is
> > at fault.
>
> Is reverting this patch, work fine or not?
>
> This patch is trying to make use of front porch instead of existing
> back porch to compute the delay. Since we revert the VBP fix patch[1]
> to assume VBP as VFP value look like your setup would also require to
> revert this change. But as per BSP or drm_mode details all of my
> displays even work with and w/o reverting these two.
>
> I'm thinking your display should work in the same behavior since the
> dsi controller making this route.

Any further comments on this?

\
 
 \ /
  Last update: 2019-01-06 17:29    [W:0.094 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site