lkml.org 
[lkml]   [2019]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] arm64: dts: rockchip: add video codec for rk3399
From
Date
On Sun, 2019-01-06 at 23:05 +0800, Ayaka wrote:
> > On Jan 6, 2019, at 10:22 PM, Ezequiel Garcia <ezequiel@collabora.com> wrote:
> >
> > Hi Randy,
> >
> > Thanks a lot for this patches. They are really useful
> > to provide more insight into the VPU hardware.
> >
> > This change will make the vpu encoder and vpu decoder
> > completely independent, can they really work in parallel?
> As I said it depends on the platform, but with this patch, the user space would think they can work at the same time.


I think there is some confusion.

The devicetree is one thing: it is a hardware representation,
a way to describe the hardware, for the kernel/bootloader to
parse.

The userspace view will depend on the driver implementation.

The current devicetree and driver (without your patches),
model the VPU as a single piece of hardware, exposing a decoder
and an encoder.

The V4L driver will then create two video devices, i.e. /dev/videoX
and /dev/videoY. So userspace sees an independent view of the
devices.

However, they are internally connected, and thus we can
easily avoid two jobs running in parallel.

So, in other words, if the VPU can issue a decoder and encoder
job in parallel, then it's useful to model it as two independent
devices. Otherwise, it's better not to.

I hope this can clarify things a bit for you!

PS: Too bad I won't be at FOSDEM to discuss this personally.

Thanks,
Ezequiel

> BTW, not only the decoder, there is a post processor with the decoder, it can be used as part of the decoder pipeline with only a macro block delay
> or process the data from an external buffer.
> I forget to write a note on what this driver doesn’t present. The real one would have much complex scheduler system, but this one is just a queue.
> More task management feature are not there.
> Also the clock boosting is removing and the loading analysis, which are useful for encoder, especially on the rv1108.
> > Could you provide more details about what is
> > shared between these devices?
> No, if Rockchip doesn’t tell, my mouth is sealed.
> > Thanks a lot!
> >
> > > On Sun, 2019-01-06 at 02:31 +0800, Randy Li wrote:
> > > It offers an example how a full features video codec
> > > should be configured.
> > >
> > > The original clocks assignment don't look good, if the clocks
> > > lower than 300MHZ, most of decoing tasks would suffer from
> > > timeout problem, 500MHZ is also a little high for RK3399
> > > running in a stable state.
> > >
> > > Signed-off-by: Randy Li <ayaka@soulik.info>
> > > ---
> > > .../boot/dts/rockchip/rk3399-sapphire.dtsi | 29 ++++++++
> > > arch/arm64/boot/dts/rockchip/rk3399.dtsi | 68 +++++++++++++++++--
> > > 2 files changed, 90 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
> > > index 946d3589575a..c3db878bae45 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
> > > @@ -632,6 +632,35 @@
> > > dr_mode = "host";
> > > };
> > >
> > > +&rkvdec {
> > > + status = "okay";
> > > +};
> > > +
> > > +&rkvdec_srv {
> > > + status = "okay";
> > > +};
> > > +
> > > +&vdec_mmu {
> > > + status = "okay";
> > > +};
> > > +
> > > +&vdpu {
> > > + status = "okay";
> > > +};
> > > +
> > > +&vepu {
> > > + status = "okay";
> > > +};
> > > +
> > > +&vpu_service {
> > > + status = "okay";
> > > +};
> > > +
> > > +&vpu_mmu {
> > > + status = "okay";
> > > +
> > > +};
> > > +
> > > &vopb {
> > > status = "okay";
> > > };
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> > > index b22b2e40422b..5fa3247e7bf0 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> > > @@ -1242,16 +1242,39 @@
> > > status = "disabled";
> > > };
> > >
> > > - vpu: video-codec@ff650000 {
> > > - compatible = "rockchip,rk3399-vpu";
> > > - reg = <0x0 0xff650000 0x0 0x800>;
> > > - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
> > > - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
> > > - interrupt-names = "vepu", "vdpu";
> > > + vpu_service: vpu-srv {
> > > + compatible = "rockchip,mpp-service";
> > > + status = "disabled";
> > > + };
> > > +
> > > + vepu: vpu-encoder@ff650000 {
> > > + compatible = "rockchip,vpu-encoder-v2";
> > > + reg = <0x0 0xff650000 0x0 0x400>;
> > > + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
> > > + interrupt-names = "irq_enc";
> > > clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> > > - clock-names = "aclk", "hclk";
> > > + clock-names = "aclk_vcodec", "hclk_vcodec";
> > > + resets = <&cru SRST_H_VCODEC>, <&cru SRST_A_VCODEC>;
> > > + reset-names = "video_h", "video_a";
> > > iommus = <&vpu_mmu>;
> > > power-domains = <&power RK3399_PD_VCODEC>;
> > > + rockchip,srv = <&vpu_service>;
> > > + status = "disabled";
> > > + };
> > > +
> > > + vdpu: vpu-decoder@ff650400 {
> > > + compatible = "rockchip,vpu-decoder-v2";
> > > + reg = <0x0 0xff650400 0x0 0x400>;
> > > + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
> > > + interrupt-names = "irq_dec";
> > > + iommus = <&vpu_mmu>;
> > > + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> > > + clock-names = "aclk_vcodec", "hclk_vcodec";
> > > + resets = <&cru SRST_H_VCODEC>, <&cru SRST_A_VCODEC>;
> > > + reset-names = "video_h", "video_a";
> > > + power-domains = <&power RK3399_PD_VCODEC>;
> > > + rockchip,srv = <&vpu_service>;
> > > + status = "disabled";
> > > };
> > >
> > > vpu_mmu: iommu@ff650800 {
> > > @@ -1261,11 +1284,42 @@
> > > interrupt-names = "vpu_mmu";
> > > clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
> > > clock-names = "aclk", "iface";
> > > + assigned-clocks = <&cru ACLK_VCODEC_PRE>;
> > > + assigned-clock-parents = <&cru PLL_GPLL>;
> > > #iommu-cells = <0>;
> > > power-domains = <&power RK3399_PD_VCODEC>;
> > > status = "disabled";
> > > };
> > >
> > > + rkvdec_srv: rkvdec-srv {
> > > + compatible = "rockchip,mpp-service";
> > > + status = "disabled";
> > > + };
> > > +
> > > + rkvdec: video-decoder@ff660000 {
> > > + compatible = "rockchip,video-decoder-v1";
> > > + reg = <0x0 0xff660000 0x0 0x400>;
> > > + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
> > > + interrupt-names = "irq_dec";
> > > + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
> > > + <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
> > > + clock-names = "aclk_vcodec", "hclk_vcodec",
> > > + "clk_cabac", "clk_core";
> > > + assigned-clocks = <&cru ACLK_VDU_PRE>, <&cru SCLK_VDU_CA>,
> > > + <&cru SCLK_VDU_CORE>;
> > > + assigned-clock-parents = <&cru PLL_NPLL>, <&cru PLL_NPLL>,
> > > + <&cru PLL_NPLL>;
> > > + resets = <&cru SRST_H_VDU>, <&cru SRST_A_VDU>,
> > > + <&cru SRST_VDU_CORE>, <&cru SRST_VDU_CA>,
> > > + <&cru SRST_A_VDU_NOC>, <&cru SRST_H_VDU_NOC>;
> > > + reset-names = "video_h", "video_a", "video_core", "video_cabac",
> > > + "niu_a", "niu_h";
> > > + power-domains = <&power RK3399_PD_VDU>;
> > > + rockchip,srv = <&rkvdec_srv>;
> > > + iommus = <&vdec_mmu>;
> > > + status = "disabled";
> > > + };
> > > +
> > > vdec_mmu: iommu@ff660480 {
> > > compatible = "rockchip,iommu";
> > > reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;


\
 
 \ /
  Last update: 2019-01-06 17:05    [W:0.060 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site