lkml.org 
[lkml]   [2019]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/6] usb: gadget: uvc: enqueue usb request in setup handler for control OUT
Date
Currently, for uvc class-specific control IN and OUT requests, in the
setup handler a UVC_EVENT_SETUP with the setup control is enqueued to
userspace. In response to this, the uvc function driver expects
userspace to call ioctl UVCIOC_SEND_RESPONSE containing uvc request
data.

In the case of control IN this is fine, but for control OUT it causes a
problem. Since the host sends data immediately after the setup stage
completes, it is possible that the empty uvc request data is not
enqueued in time for the UDC driver to put the data stage data into
(this causes some UDC drivers, such as MUSB, to reply with a STALL).
This problem is remedied by having the setup handler enqueue the empty
uvc request data, instead of waiting for userspace to do it.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
No change from v3
No change from v2
No change from v1

drivers/usb/gadget/function/f_uvc.c | 25 +++++++++++++++++++------
drivers/usb/gadget/function/uvc_v4l2.c | 7 +++++++
2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 3472a2863436..96054403418a 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -223,8 +223,6 @@ static int
uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
{
struct uvc_device *uvc = to_uvc(f);
- struct v4l2_event v4l2_event;
- struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;

if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS) {
uvcg_info(f, "invalid request type\n");
@@ -241,10 +239,25 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
uvc->event_setup_out = !(ctrl->bRequestType & USB_DIR_IN);
uvc->event_length = le16_to_cpu(ctrl->wLength);

- memset(&v4l2_event, 0, sizeof(v4l2_event));
- v4l2_event.type = UVC_EVENT_SETUP;
- memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
- v4l2_event_queue(&uvc->vdev, &v4l2_event);
+ if (uvc->event_setup_out) {
+ struct usb_request *req = uvc->control_req;
+
+ /*
+ * Enqueue the request immediately for control OUT as the
+ * host will start the data stage straight away.
+ */
+ req->length = uvc->event_length;
+ req->zero = 0;
+ usb_ep_queue(f->config->cdev->gadget->ep0, req, GFP_KERNEL);
+ } else {
+ struct v4l2_event v4l2_event;
+ struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+
+ memset(&v4l2_event, 0, sizeof(v4l2_event));
+ v4l2_event.type = UVC_EVENT_SETUP;
+ memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
+ v4l2_event_queue(&uvc->vdev, &v4l2_event);
+ }

return 0;
}
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index 4b0a82cc4763..9f7c67f6f4b2 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -35,6 +35,13 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
struct usb_composite_dev *cdev = uvc->func.config->cdev;
struct usb_request *req = uvc->control_req;

+ /*
+ * For control OUT transfers the request has been enqueued synchronously
+ * by the setup handler, there's nothing to be done here.
+ */
+ if (uvc->event_setup_out)
+ return 0;
+
if (data->length < 0)
return usb_ep_set_halt(cdev->gadget->ep0);

--
2.19.2
\
 
 \ /
  Last update: 2019-01-06 17:03    [W:0.306 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site