lkml.org 
[lkml]   [2019]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/8 v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
On Fri, Jan 4, 2019 at 9:39 PM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> On Fri, Jan 04, 2019 at 09:22:46PM -0800, John Stultz wrote:
> > On Fri, Jan 4, 2019 at 7:42 PM Manivannan Sadhasivam
> > <manivannan.sadhasivam@linaro.org> wrote:
> > > On Fri, Jan 04, 2019 at 12:56:23PM -0800, John Stultz wrote:
> > > > From: Youlin Wang <wwx575822@notesmail.huawei.com>
> > > >
> > > > There is an new "hisi-pcm-asp-dma-1.0" device added in
> > > > "arch/arm64/boot/dts/hisilicon/hi3660.dtsi".
> > > > So we have to add a matching id in the driver file:
> > > > .compatible = "hisilicon,hisi-pcm-asp-dma-1.0"
> > > >
> > > > And also hisi-pcm-asp dma device needs no setting to the clock.
> > > > So we skip this by adding and using soc data flags.
> > > >
> > > > After above this driver will support both k3 and hisi_asp dma hardware.
> > > >
> > >
> > > Small description about the hardware (ASP DMAC) would be really helpful.
> >
> > I've taken a shot at this (along with integrating your other feedback
> > - thanks again for the review!), though as I don't have direct
> > documentation, my knowledge is a bit second hand.
> >
> > See here:
> > https://git.linaro.org/people/john.stultz/android-dev.git/commit/?h=dev/hikey960-mainline-WIP&id=754a79facf1af0b59a7f8fd63050da12ebf5521e
> >
> > Let me know if you have suggestions for more specific changes!
>
> Description looks good to me. But looks like you are not protecting the
> other clk APIs like clk_prepare_enable and clk_disable_unprepare. Don't
> they fail when the relevant clk is not found?

No, those calls just return 0 if null clock is passed

int clk_prepare(struct clk *clk)
{
if (!clk)
return 0;
...

thanks
-john

\
 
 \ /
  Last update: 2019-01-05 06:44    [W:0.067 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site