Messages in this thread Patch in this message | | | Subject | Re: [PATCH v5] irqchip/mmp: only touch the PJ4 & FIQ bits on enable/disable | From | Lubomir Rintel <> | Date | Mon, 28 Jan 2019 19:41:57 +0100 |
| |
On Mon, 2019-01-28 at 18:35 +0000, Marc Zyngier wrote: > I guess the subject is supposed to read: "only touch the PJ4 *IRQ* & FIQ > bits on enable/disable", right? > > If that's the case, let me know, and I'll fix it up when applying it.
Yes, that would make more sense.
Thank you Lubo
> On 28/01/2019 15:59, Lubomir Rintel wrote: > > Resetting the bit 4 disables the interrupt delivery to the "secure > > processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop, > > where the firmware running on the "secure processor" bit-bangs the > > PS/2 protocol over the GPIO lines. > > > > It is not clear what the rest of the bits are and Marvel was unhelpful > > when asked for documentation. Aside from the SP bit, there are probably > > priority bits. > > > > Leaving the unknown bits as the firmware set them up seems to be a wiser > > course of action compared to just turning them off. > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > > Acked-by: Pavel Machek <pavel@ucw.cz> > > > > --- > > Changes since v4: > > - Remove unused ICU_INT_ROUTE_SP_IRQ define > > - Try to further clarify the commit message > > > > Changes since v3: > > - Use #defined instead of integer literals > > > > Changes since v2: > > - Correct subsystem maintainers on Cc (irqchip) > > > > Changes since v1: > > - Adjusted wording & ack from Pavel > > --- > > drivers/irqchip/irq-mmp.c | 6 +++++- > > 1 file changed, 5 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c > > index 37a54797a137..fac8f1365f76 100644 > > --- a/drivers/irqchip/irq-mmp.c > > +++ b/drivers/irqchip/irq-mmp.c > > @@ -34,6 +34,9 @@ > > #define SEL_INT_PENDING (1 << 6) > > #define SEL_INT_NUM_MASK 0x3f > > > > +#define MMP2_ICU_INT_ROUTE_PJ4_IRQ (1 << 5) > > +#define MMP2_ICU_INT_ROUTE_PJ4_FIQ (1 << 6) > > + > > struct icu_chip_data { > > int nr_irqs; > > unsigned int virq_base; > > @@ -190,7 +193,8 @@ static const struct mmp_intc_conf mmp_conf = { > > static const struct mmp_intc_conf mmp2_conf = { > > .conf_enable = 0x20, > > .conf_disable = 0x0, > > - .conf_mask = 0x7f, > > + .conf_mask = MMP2_ICU_INT_ROUTE_PJ4_IRQ | > > + MMP2_ICU_INT_ROUTE_PJ4_FIQ, > > }; > > > > static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs) > > > > Thanks, > > M.
| |