[lkml]   [2019]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 2/2] clk: ingenic: Fix doc of ingenic_cgu_div_info
The 'div' field does not represent a number of bits used to divide
(understand: right-shift) the divider, but a number itself used to
divide the divider.

Signed-off-by: Paul Cercueil <>
Signed-off-by: Maarten ter Huurne <>
Cc: <>
drivers/clk/ingenic/cgu.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 502bcbb61b04..e12716d8ce3c 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -80,7 +80,7 @@ struct ingenic_cgu_mux_info {
* @reg: offset of the divider control register within the CGU
* @shift: number of bits to left shift the divide value by (ie. the index of
* the lowest bit of the divide value within its control register)
- * @div: number of bits to divide the divider value by (i.e. if the
+ * @div: number to divide the divider value by (i.e. if the
* effective divider value is the value written to the register
* multiplied by some constant)
* @bits: the size of the divide value in bits
 \ /
  Last update: 2019-01-28 03:10    [W:0.043 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site