lkml.org 
[lkml]   [2019]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [Openipmi-developer] [PATCH v2] ipmi_si: fix use-after-free of resource->name
From
Date


On 2019/1/26 23:08, Corey Minyard wrote:
> On Sat, Jan 26, 2019 at 05:14:54PM +0800, Yang Yingliang wrote:
>> When we excute the following commands, we got oops
>> rmmod ipmi_si
>> cat /proc/ioports
>>
> snip..
>
>> If io_setup is called successful in try_smi_init() but try_smi_init()
>> goes out_err before calling ipmi_register_smi(), so ipmi_unregister_smi()
>> will not be called while removing module. It leads to the resource that
>> allocated in io_setup() can not be freed, but the name(DEVICE_NAME) of
>> resource is freed while removing the module. It causes use-after-free
>> when cat /proc/ioports.
>>
>> Fix this by calling io_cleanup() while try_smi_init() goes to out_err
>> and don't call release_region() if request_region() is not called to
>> avoid error prints.
>>
>> Fixes: 93c303d2045b ("ipmi_si: Clean up shutdown a bit")
>> Cc: stable@vger.kernel.org
>> Reported-by: NuoHan Qiao <qiaonuohan@huawei.com>
>> Suggested-by: Corey Minyard <cminyard@mvista.com>
>> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
>> ---
>> drivers/char/ipmi/ipmi_si_intf.c | 5 +++++
>> drivers/char/ipmi/ipmi_si_port_io.c | 3 +++
>> 2 files changed, 8 insertions(+)
>>
>> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
>> index dc8603d..f1b9fda 100644
>> --- a/drivers/char/ipmi/ipmi_si_intf.c
>> +++ b/drivers/char/ipmi/ipmi_si_intf.c
>> @@ -2085,6 +2085,11 @@ static int try_smi_init(struct smi_info *new_smi)
>> WARN_ON(new_smi->io.dev->init_name != NULL);
>>
>> out_err:
>> + if (rv && new_smi->io.io_cleanup) {
>> + new_smi->io.io_cleanup(&new_smi->io);
>> + new_smi->io.io_cleanup = NULL;
>> + }
>> +
>> kfree(init_name);
>> return rv;
>> }
>> diff --git a/drivers/char/ipmi/ipmi_si_port_io.c b/drivers/char/ipmi/ipmi_si_port_io.c
>> index ef6dffc..0c46a3f 100644
>> --- a/drivers/char/ipmi/ipmi_si_port_io.c
>> +++ b/drivers/char/ipmi/ipmi_si_port_io.c
>> @@ -53,6 +53,9 @@ static void port_cleanup(struct si_sm_io *io)
>> unsigned int addr = io->addr_data;
>> int idx;
>>
>> + if (io->regsize != 1 && io->regsize != 2 && io->regsize != 4)
>> + return;
>> +
> Why do you need this part? I can't see the reason for it. The addr
> part below should handle that, especially with the above change.
>
> -corey
If ipmi_si_port_setup() returns in default case, request_region() won't
be called,
so we don't need to call release_region() or it will prints some warning
messages like
this "Trying to free nonexistent resource...".

We don't need call io_cleanup() until the io_setup() returns successful.
How about change this part like this:

diff --git a/drivers/char/ipmi/ipmi_si_port_io.c
b/drivers/char/ipmi/ipmi_si_port_io.c
index ef6dffc..03924c3 100644
--- a/drivers/char/ipmi/ipmi_si_port_io.c
+++ b/drivers/char/ipmi/ipmi_si_port_io.c
@@ -68,8 +68,6 @@ int ipmi_si_port_setup(struct si_sm_io *io)
if (!addr)
return -ENODEV;

- io->io_cleanup = port_cleanup;
-
/*
* Figure out the actual inb/inw/inl/etc routine to use based
* upon the register size.
@@ -109,5 +107,8 @@ int ipmi_si_port_setup(struct si_sm_io *io)
return -EIO;
}
}
+
+ io->io_cleanup = port_cleanup;
+
return 0;
}
Thanks,
Yang
>
>> if (addr) {
>> for (idx = 0; idx < io->io_size; idx++)
>> release_region(addr + idx * io->regspacing,
>> --
>> 1.8.3
>>
>>
>>
>>
>> _______________________________________________
>> Openipmi-developer mailing list
>> Openipmi-developer@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/openipmi-developer
> .
>


\
 
 \ /
  Last update: 2019-01-28 02:54    [W:0.075 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site