lkml.org 
[lkml]   [2019]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] Add device tree binding documentation for MAX44009
On Sat, 26 Jan 2019 11:16:21 -0800
Robert Eshleman <bobbyeshleman@gmail.com> wrote:

> Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Looks good to me. As we are going for a v3 due to patch 1, plenty
of time for others to comment.

Thanks,

Jonathan
> ---
> .../bindings/iio/light/max44009.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/light/max44009.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/light/max44009.txt b/Documentation/devicetree/bindings/iio/light/max44009.txt
> new file mode 100644
> index 000000000000..b287d7732e37
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/max44009.txt
> @@ -0,0 +1,25 @@
> +* MAX44009 Ambient Light Sensor
> +
> +Required properties:
> +
> +- compatible: should be "maxim,max44009"
> +- reg: the I2C address of the device (default is <0x4a>)
> +
> +Optional properties:
> +
> +- interrupts: interrupt mapping for GPIO IRQ. Should be configured with
> + IRQ_TYPE_EDGE_FALLING.
> +
> +Refer to interrupt-controller/interrupts.txt for generic interrupt client
> +node bindings.
> +
> +Example:
> +
> +max44009: max44009@4a {
> + compatible = "maxim,max44009";
> + reg = <0x4a>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
> +};
> +

\
 
 \ /
  Last update: 2019-01-26 22:05    [W:0.224 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site