lkml.org 
[lkml]   [2019]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ARM: dts: meson8b: odroidc1: Enable usb phy node
Hi Kevin,
On Wed, 23 Jan 2019 at 22:20, Kevin Hilman <khilman@baylibre.com> wrote:
>
> Anand Moon <linux.amoon@gmail.com> writes:
>
> > Add missing vbus-supply link to phy controller for usb_phy0
> > and usb_phy1 nodes, this changes fixed the power issue
> > on usb ports usb, changes help fix usb reset warning.
> >
> > [ 821.991470] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [ 825.243385] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [ 828.151310] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [ 830.991241] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> >
> > Fixes: 2eb79a4d15ff (ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board)
> > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > Cc: Jerome Brunet <jbrunet@baylibre.com>
> > Cc: Neil Armstrong <narmstrong@baylibre.com>
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > Rebased on Kevin's amlogic/v5.0/fixes branch
>
> As requested, dropping this series from the fixes branch pending further
> debug and testing.
>
> Kevin

[snip]

Thanks your very much.

Best Regards
-Anand

\
 
 \ /
  Last update: 2019-01-23 19:25    [W:0.142 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site