lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 3/6] usb: host: Stops USB controller init if PLL fails to lock
From
Date
Hello!

On 21.01.2019 6:13, Yinbo Zhu wrote:

> From: yinbo.zhu <yinbo.zhu@nxp.com>
>
> USB erratum-A006918 workaround tries to start internal PHY inside
> uboot (when PLL fails to lock). However, if the workaround also
> fails, then USB initialization is also stopped inside Linux.
> Erratum-A006918 workaround failure creates "fsl,erratum_a006918"
> node in device-tree. Presence of this node in device-tree is
> used to stop USB controller initialization in Linux
>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> ---
> drivers/usb/host/ehci-fsl.c | 5 +++++
> drivers/usb/host/fsl-mph-dr-of.c | 5 +++++
> 2 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index a28ec1e..6884130 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -224,6 +224,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
> portsc |= PORT_PTS_PTW;
> /* fall through */
> case FSL_USB2_PHY_UTMI:
> + if (pdata->has_fsl_erratum_a006918) {
> + pr_warn("fsl-ehci: USB PHY clock invalid\n");
> + return -EINVAL;
> + }
> +
> case FSL_USB2_PHY_UTMI_DUAL:
> /* PHY_CLK_VALID bit is de-featured from all controller
> * versions below 2.4 and is to be checked only for
> diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
> index 677f9d5..7e07701 100644
> --- a/drivers/usb/host/fsl-mph-dr-of.c
> +++ b/drivers/usb/host/fsl-mph-dr-of.c
> @@ -225,6 +225,11 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
> pdata->has_fsl_erratum_a005697 =
> of_property_read_bool(np, "fsl,usb_erratum-a005697");
>
> + if (of_get_property(np, "fsl,erratum_a006918", NULL))

of_property_read_bool() perhaps?

> + pdata->has_fsl_erratum_a006918 = 1;
> + else
> + pdata->has_fsl_erratum_a006918 = 0;
> +
> /*
> * Determine whether phy_clk_valid needs to be checked
> * by reading property in device tree

MBR, Sergei

\
 
 \ /
  Last update: 2019-01-21 09:17    [W:0.110 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site