Messages in this thread | | | Subject | Re: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680 | From | sebastien bourdelin <> | Date | Mon, 21 Jan 2019 16:43:26 -0500 |
| |
On 1/19/19 11:57 AM, Jonathan Cameron wrote: > On Mon, 14 Jan 2019 15:17:10 -0500 > sebastien bourdelin <sebastien.bourdelin@gmail.com> wrote: > >> On 1/12/19 1:28 PM, Jonathan Cameron wrote: >>> On Fri, 11 Jan 2019 15:53:59 -0500 >>> Sebastien Bourdelin <sebastien.bourdelin@gmail.com> wrote: >>> >>>> BME680 is a pressure/temperature/humidity/voc sensor. >>>> >>>> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@gmail.com> >>> Hmm. We could add the VDD and VDIO regulators perhaps. >>> Driver assumes they are on currently but we'll get a board where control >>> is needed sooner or later. I'm not that fussed about this though. >> If that's fine with you, i prefer to leave it as it is right now as i >> don't feel >> >> confident enough to correctly explain it in the Documentation. >> >> But if you have more input, you are more then welcome! > Given we aren't planning to do more than turn them on and that'll work > fine with stub regulators (so they can effectively be optional for ever), > there is no particular need to put them in now if you prefer not to. > > Jonathan Ok Thanks Jonathan! >>> Jonathan >>> >>>> --- >>>> .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++ >>>> 1 file changed, 11 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt >>>> >>>> diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt >>>> new file mode 100644 >>>> index 000000000000..885a1b918340 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt >>>> @@ -0,0 +1,11 @@ >>>> +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors >>>> + >>>> +Required properties: >>>> +- compatible: must be "bosch,bme680" >>>> + >>>> +Example: >>>> + >>>> +bme680@77 { >>>> + compatible = "bosch,bme680"; >>>> + reg = <0x77>; >>>> +};
| |