lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/6] dt-bindings: display: armada: Add display subsystem binding
On Sun, Jan 20, 2019 at 11:26 AM Lubomir Rintel <lkundrak@v3.sk> wrote:
>
> The Marvell Armada DRM master device is a virtual device needed to list all
> nodes that comprise the graphics subsystem.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
> .../display/armada/marvell-armada-drm.txt | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt b/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt
> index de4cca9432c8..3dbfa8047f0b 100644
> --- a/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt
> +++ b/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt
> @@ -1,3 +1,27 @@
> +Marvell Armada DRM master device
> +================================
> +
> +The Marvell Armada DRM master device is a virtual device needed to list all
> +nodes that comprise the graphics subsystem.
> +
> +Required properties:
> +
> + - compatible: value should be "marvell,dove-display-subsystem",
> + "marvell,armada-display-subsystem"
> + - ports: a list of phandles pointing to display interface ports of CRTC
> + devices
> + - memory-region: phandle to a node describing memory to be used for the
> + framebuffer
> +
> +Example:
> +
> + display-subsystem {
> + compatible = "marvell,dove-display-subsystem",
> + "marvell,armada-display-subsystem";
> + memory-region = <&display_reserved>;
> + ports = <&lcd0_port>;

If there is only one device, you don't need this virtual node.


> + };
> +
> Marvell Armada LCD controller
> =============================
>
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2019-01-21 16:35    [W:0.123 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site