lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: imx6qdl-apalis: add phy-supply
On 18.01.2019 14:32, Stefan Agner wrote:
> Use the VDD I/O rail as phy-supply regulator. Technically, the
> regulator has multiple rails, but currently the driver only
> supports a single phy-supply. The VDD I/O rail has the highest
> power consumption when software power down is used and hence
> the highest saving potential.

Please don't merge this patch. The vgen5_reg is also used as a pull-up
for USB ID pin, it would not be safe for the FEC driver to disable this
rail.

--
Stefan


>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> arch/arm/boot/dts/imx6qdl-apalis.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 0b47aecf336a..cf66f9ececbd 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -241,6 +241,7 @@
> phy-handle = <&ethphy>;
> phy-reset-duration = <10>;
> phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> + phy-supply = <&vgen5_reg>;
> status = "okay";
>
> mdio {

\
 
 \ /
  Last update: 2019-01-21 15:31    [W:0.059 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site