lkml.org 
[lkml]   [2019]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] imx8mq.dtsi: add the sdma nodes
Date
Add the sdma nodes to the base devicetree for the imx8mq

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 31 +++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index c0402375e7c1..0b9a9b5ae7b7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -336,6 +336,19 @@
clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
status = "disabled";
};
+
+ sdma2: sdma@302c0000 {
+ compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
+ reg = <0x302c0000 0x10000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+ <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ fsl,ratio-1-1;
+ status = "disabled";
+ };
};

bus@30400000 { /* AIPS2 */
@@ -370,6 +383,8 @@
clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
<&clk IMX8MQ_CLK_UART3_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};

@@ -381,6 +396,8 @@
clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
<&clk IMX8MQ_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};

@@ -432,6 +449,8 @@
clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
<&clk IMX8MQ_CLK_UART4_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};

@@ -465,6 +484,18 @@
status = "disabled";
};

+ sdma1: sdma@30bd0000 {
+ compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
+ reg = <0x30bd0000 0x10000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+ <&clk IMX8MQ_CLK_SDMA1_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ status = "disabled";
+ };
+
fec1: ethernet@30be0000 {
compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
--
2.17.1
\
 
 \ /
  Last update: 2019-01-20 03:05    [W:0.129 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site