lkml.org 
[lkml]   [2019]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 15/15] spmi: pmic-arb: revert "disassociate old virq if hwirq mapping already exists"
Date
Now that spmi-gpio is a proper hierarchical IRQ chip, and all in-tree
users of device tree have been updated, we can now drop the hack that
was introduced to disassociate the old Linux virq if a hwirq mapping
already exists. That patch was introduced to not break git bisect for
any existing boards.

Driver was tested using gpio-keys and iadc/vadc on the LG Nexus 5
(hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
Changes since v5:
- None

Changes since v4:
- None

Patch introduced in v4.

drivers/spmi/spmi-pmic-arb.c | 5 -----
1 file changed, 5 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 5666b99c9a92..316e2708f3ba 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -745,15 +745,10 @@ static int qpnpint_irq_domain_map(struct spmi_pmic_arb *pmic_arb,
irq_hw_number_t hwirq, unsigned int type)
{
irq_flow_handler_t handler;
- unsigned int old_virq;

dev_dbg(&pmic_arb->spmic->dev, "virq = %u, hwirq = %lu, type = %u\n",
virq, hwirq, type);

- old_virq = irq_find_mapping(domain, hwirq);
- if (old_virq)
- irq_domain_disassociate(domain, old_virq);
-
if (type & IRQ_TYPE_EDGE_BOTH)
handler = handle_edge_irq;
else if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--
2.17.2
\
 
 \ /
  Last update: 2019-01-19 21:44    [W:0.236 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site