lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v7 3/5] mtd: m25p80: add support of octal mode I/O transfer
Date


On 01/15/2019 12:05 PM, Yogesh Narayan Gaur wrote:
> Add support for octal mode I/O data transfer based on the controller (spi)
> mode.
> Assign hw-capability mask bits for octal transfer.
>
> Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

> ---
> drivers/mtd/devices/m25p80.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index c4a1d04b8c80..651bab6d4e31 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -195,7 +195,14 @@ static int m25p_probe(struct spi_mem *spimem)
> spi_mem_set_drvdata(spimem, flash);
> flash->spimem = spimem;
>
> - if (spi->mode & SPI_RX_QUAD) {
> + if (spi->mode & SPI_RX_OCTAL) {
> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
> +
> + if (spi->mode & SPI_TX_OCTAL)
> + hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
> + SNOR_HWCAPS_PP_1_1_8 |
> + SNOR_HWCAPS_PP_1_8_8);
> + } else if (spi->mode & SPI_RX_QUAD) {
> hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
>
> if (spi->mode & SPI_TX_QUAD)
>
\
 
 \ /
  Last update: 2019-01-17 08:17    [W:0.123 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site