lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2,2/2] usb: chipidea: imx: set power polarity
From
Date
Hello!

On 01/16/2019 01:51 PM, Philipp Puschmann wrote:

> This patch adds support to set the power line polarity for i.MX6q/dl.
>
> To let the USB controller control the power it may be necessary to configure
> the polarity of the power line. So far the polarity was configured
> by Bootloader or alternatively the power line was muxed as gpio and
> driven by a regulator.
>
> Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com>
> ---
>
> V2: fixed wrong variable name ...
>
> ---
> drivers/usb/chipidea/ci_hdrc_imx.c | 3 +++
> drivers/usb/chipidea/ci_hdrc_imx.h | 1 +
> drivers/usb/chipidea/usbmisc_imx.c | 4 ++++
> 3 files changed, 8 insertions(+)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index e81de9ca8729..32dc120680fa 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -152,6 +152,9 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
> dev_warn(dev, "No over current polarity defined\n");
> }
>
> + if (of_find_property(np, "power-active-high", NULL))

How about of_property_read_bool()?

> + data->pwr_pol = 1;
> +
> if (of_find_property(np, "external-vbus-divider", NULL))
> data->evdo = 1;
>
[...]

MBR, Sergei

\
 
 \ /
  Last update: 2019-01-16 17:32    [W:0.103 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site