lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] wlcore: sdio: Fixup power on/off sequence
* Ulf Hansson <ulf.hansson@linaro.org> [190116 11:44]:
> On Tue, 15 Jan 2019 at 19:55, Tony Lindgren <tony@atomide.com> wrote:
> > # while [ 1 ]; do ifconfig wlan0 down; usleep 20000; \
> > ifconfig wlan0 up; done
> >
> > Otherwise I get the following on warning pandaboard-es:
> >
> > WARNING: CPU: 0 PID: 1770 at drivers/bus/omap_l3_noc.c:147
> > l3_interrupt_handler+0x2f8/0x388
> > 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Read):
> > Data Access in User mode during Functional access
> >
> > Meaning that we access registers while not clocked
> > somewhere. I think that warning is different from the
> > earlier errors though :) And we could add a msleep(50)
> > to the end to mostly avoid it until we have a better
> > fix available?
>
> Well, that would paper over the problem, let's see if we can avoid it.
>
> I realized that I have not invoked mmc_hw_reset() with the sdio host
> claimed. This could be the reason and is fixed in a v2, please try and
> see if that solves the "new" problem. If id doesn't, you could also
> convert the pm_runtime_put() to a pm_runtime_put_sync() in
> wl12xx_sdio_power_off() and see if that makes a difference.

Yes you're right v2 works for me no problem. I'll go ack
it there.

Tony

\
 
 \ /
  Last update: 2019-01-16 16:40    [W:0.032 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site