lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] mfd: tps65218.c: Add input voltage options
On Mon, 14 Jan 2019, Christian Hohnstaedt wrote:

> These options apply to all regulators in this chip.
>
> ti,strict-supply-voltage-supervision:
> Set STRICT flag in CONFIG1
> ti,under-voltage-limit-microvolt:
> Select 2.75, 2.95, 3.25 or 3.35 V UVLO in CONFIG1
> ti,under-voltage-hyst-microvolt:
> Select 200mV or 400mV UVLOHYS in CONFIG2
>
> Signed-off-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com>
> Tested-by: Keerthy <j-keerthy@ti.com>
> Reviewed-by: Keerthy <j-keerthy@ti.com>
> ---
> drivers/mfd/tps65218.c | 89 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/tps65218.h | 4 ++
> 2 files changed, 93 insertions(+)

This looks like regulator code.

Why aren't you placing it into the regulator driver?

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2019-01-16 15:14    [W:0.095 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site