lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] clk: qcom: clk-rpmh: Add IPA clock support
From
Date

On 1/14/2019 8:47 AM, Stephen Boyd wrote:
> Quoting David Dai (2019-01-11 16:56:14)
>> On 1/9/2019 11:28 AM, Stephen Boyd wrote:
>>> Quoting David Dai (2018-12-13 18:35:04)
>>>> +
>>>> +#define BCM_TCS_CMD(valid, vote) \
>>>> + (BCM_TCS_CMD_COMMIT_MASK | \
>>>> + ((valid) << BCM_TCS_CMD_VALID_SHIFT) | \
>>>> + ((cpu_to_le32(vote) & \
>>> Why?
>> Sorry, could you clarify this question? If you're referring to the
>> cpu_to_le32, shouldn't we be explicit about converting endianness even
>> if it might be redundant for this particular qcom platform?
> Is only the vote part of the message in little endian format and the
> rest is native CPU endianess? It's very odd to see that jammed in the
> middle of a bit packing statement like that. Typically the whole u32
> would be in one or the other endianness. Also, sparse right complains
> about this macro and it's usage, so something is wrong.
Point taken, I'll leave it out of the macro for now.
> I think one other problem is that rpmh API doesn't really talk about
> endianness here and that's busted. So if you want to fix endianness
> issues that needs to be fixed first.

Since a similar macro is being used as part of the interconnect provider
driver, I was thinking a better place for this macro might be in the
tcs.h as part of the rpmh driver? I could submit a different patch for
rpmh that mentions endianness along with this change.

>>>> @@ -29,6 +54,7 @@
>>>> * @aggr_state: rpmh clock aggregated state
>>>> * @last_sent_aggr_state: rpmh clock last aggr state sent to RPMh
>>>> * @valid_state_mask: mask to determine the state of the rpmh clock
>>>> + * @aux_data: data specific to the bcm rpmh resource
>>> But there isn't aux_data. Is this supposed to be unit? And what is unit
>>> going to be? 1000?
>> Supposed to be unit, the value is on the order of Khz.
> Ok, hopefully the kernel-doc comes out easy to understand.
>
>>>> @@ -217,6 +340,7 @@ static unsigned long clk_rpmh_recalc_rate(struct clk_hw *hw,
>>>> DEFINE_CLK_RPMH_VRM(sdm845, rf_clk1, rf_clk1_ao, "rfclka1", 1);
>>>> DEFINE_CLK_RPMH_VRM(sdm845, rf_clk2, rf_clk2_ao, "rfclka2", 1);
>>>> DEFINE_CLK_RPMH_VRM(sdm845, rf_clk3, rf_clk3_ao, "rfclka3", 1);
>>>> +DEFINE_CLK_RPMH_BCM(sdm845, ipa, "IP0");
>>> It's really IP0?! What was wrong with IPA?
>> Yeah... convention seems to be 2 letters and then a number for most BCM
>> resources.
> OK.
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2019-01-17 01:55    [W:0.051 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site