lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] dt-bindings: iio: chemical: Add bindings for bme680
On Mon, Jan 14, 2019 at 03:19:14PM -0500, Sebastien Bourdelin wrote:
> BME680 is a pressure/temperature/humidity/voc sensor.
>
> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@gmail.com>
> ---
> v2 -> v3:
> - change i2c address to 0x76 as it seems more reliable: Suggested by Himanshu Jha <himanshujha199640@gmail.com>
> - rebase on master
> ---
> .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> new file mode 100644
> index 000000000000..7f3827cfb2ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> @@ -0,0 +1,11 @@
> +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
> +
> +Required properties:
> +- compatible: must be "bosch,bme680"
> +
> +Example:
> +
> +bme680@76 {
> + compatible = "bosch,bme680";
> + reg = <0x76>;
> +};

Thanks,

Acked-by: Himanshu Jha <himanshujha199640@gmail.com>

--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology

\
 
 \ /
  Last update: 2019-01-15 19:45    [W:0.122 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site