lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: ppc64le reliable stack unwinder and scheduled tasks
On Mon, Jan 14, 2019 at 08:21:40AM +0100, Nicolai Stange wrote:
> Joe Lawrence <joe.lawrence@redhat.com> writes:
>
> > We should be careful when inspecting the bottom-most stack frame (the
> > first to be unwound), particularly for scheduled-out tasks. As Nicolai
> > Stange explains, "If I'm reading the code in _switch() correctly, the
> > first frame is completely uninitialized except for the pointer back to
> > the caller's stack frame." If a previous do_IRQ() invocation, for
> > example, has left a residual exception-marker on the first frame, the
> > stack tracer would incorrectly report this task's trace as unreliable.
> >
>
> FWIW, it's not been do_IRQ() who wrote the exception marker, but it's
> caller hardware_interrupt_common(), more specifically the
> EXCEPTION_PROLOG_COMMON_3 part therof.
>

Hi Nicolai,

Yeah, I was sloppy with the description there. :)

> I thought about this a little more and can't see anything that would
> prevent higher, i.e. non-_switch() frames to also alias with prior
> exception frames. That STACK_FRAME_REGS_MARKER is written to a stack
> frame's "parameter area" and most functions probably don't initialize
> this either. So, AFAICS, higher stack frames could potentially be
> affected by the very same problem.

Hmm, I suppose a callee could leave that stack-word untouched and then
make subsquent calls, which would be confusing for the unwinder.

> I think the best solution would be to clear the STACK_FRAME_REGS_MARKER
> upon exception return. I have a patch ready for that and will post it
> after it has passed some basic testing -- hopefully later this day.
>

I agree that this seems like the simplest way to clean up the exception
stack frame state.

> That being said, I still think that your patch should also get applied
> in some form -- looking at unitialized memory is just not a good thing
> to do.
>
> [ ... snip ...]

> I would perhaps not limit this to the STACK_FRAME_REGS_MARKER, but also
> not emit the ip obtained from the first frame into the resulting trace.
>
> I.e., how about moving all the sp/newsp handling to the beginning of the
> loop and doing an 'if (firstframe) continue;' right after that?

Good point, there is a bunch of ip and trace entries bookkeeping that
shouldn't apply in this case.

I gave the following some very light testing (5.0.0-rc2 + Petr's atomic
patches as to include and run the selftests) ... if you want to take a
bigger hammer to refactor some of the sp/newsp code (perhaps it could be
incorporated into the for() loop itself), feel free to go for it. You
could add something like this as a 2nd patch to the previously mentioned
STACK_FRAME_REGS_MARKER cleanup fix.

Thanks,

-- Joe

-->8-- -->8-- -->8-- -->8-- -->8-- -->8-- -->8-- -->8-- -->8-- -->8--

From b87f9e81cf59a6e7e2309400e1b417562414cd5c Mon Sep 17 00:00:00 2001
From: Joe Lawrence <joe.lawrence@redhat.com>
Date: Sun, 13 Jan 2019 21:02:01 -0500
Subject: [PATCH] powerpc/livepatch: relax reliable stack tracer checks for
first-frame

The bottom-most stack frame (the first to be unwound) may be largely
uninitialized, for the "Power Architecture 64-Bit ELF V2 ABI" only
requires its backchain pointer to be set.

The reliable stack tracer should be careful when verifying this frame:
skip checks on STACK_FRAME_LR_SAVE and STACK_FRAME_MARKER offsets that
may contain uninitialized residual data.

Fixes: df78d3f61480 ("powerpc/livepatch: Implement reliable stack tracing for the consistency model")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
---
arch/powerpc/kernel/stacktrace.c | 33 +++++++++++++++++++++-----------
1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index e2c50b55138f..46096687a5a8 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -84,6 +84,12 @@ save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
EXPORT_SYMBOL_GPL(save_stack_trace_regs);

#ifdef CONFIG_HAVE_RELIABLE_STACKTRACE
+/*
+ * This function returns an error if it detects any unreliable features of the
+ * stack. Otherwise it guarantees that the stack trace is reliable.
+ *
+ * If the task is not 'current', the caller *must* ensure the task is inactive.
+ */
int
save_stack_trace_tsk_reliable(struct task_struct *tsk,
struct stack_trace *trace)
@@ -142,12 +148,6 @@ save_stack_trace_tsk_reliable(struct task_struct *tsk,
if (sp & 0xF)
return 1;

- /* Mark stacktraces with exception frames as unreliable. */
- if (sp <= stack_end - STACK_INT_FRAME_SIZE &&
- stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
- return 1;
- }
-
newsp = stack[0];
/* Stack grows downwards; unwinder may only go up. */
if (newsp <= sp)
@@ -158,11 +158,21 @@ save_stack_trace_tsk_reliable(struct task_struct *tsk,
return 1; /* invalid backlink, too far up. */
}

+ /* We can only trust the bottom frame's backlink, the rest
+ * of the frame may be uninitialized, continue to the next. */
+ if (firstframe--)
+ goto next;
+
+ /* Mark stacktraces with exception frames as unreliable. */
+ if (sp <= stack_end - STACK_INT_FRAME_SIZE &&
+ stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
+ return 1;
+ }
+
/* Examine the saved LR: it must point into kernel code. */
ip = stack[STACK_FRAME_LR_SAVE];
- if (!firstframe && !__kernel_text_address(ip))
+ if (!__kernel_text_address(ip))
return 1;
- firstframe = 0;

/*
* FIXME: IMHO these tests do not belong in
@@ -183,12 +193,13 @@ save_stack_trace_tsk_reliable(struct task_struct *tsk,
else
trace->skip--;

- if (newsp == stack_end)
- break;
-
if (trace->nr_entries >= trace->max_entries)
return -E2BIG;

+next:
+ if (newsp == stack_end)
+ break;
+
sp = newsp;
}
return 0;
--
2.20.1

\
 
 \ /
  Last update: 2019-01-14 17:48    [W:0.126 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site