lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] phy: fix build breakage: add PHY_MODE_SATA
From
Date


On 13/01/19 7:35 AM, Jens Axboe wrote:
> On 1/12/19 6:29 PM, john.hubbard@gmail.com wrote:
>> From: John Hubbard <jhubbard@nvidia.com>
>>
>> Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
>> the PHY_MODE_SATA, but that enum had not yet been added. This caused a
>> build failure for me, with today's linux.git.
>>
>> Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
>> in the Marvell Berlin SATA PHY driver.
>>
>> Fix the build by:
>>
>> 1) Renaming Marvell's defined value to a more scoped name,
>> in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
>>
>> 2) Adding the missing enum, which was going to be added anyway as part
>> of [1].
>>
>> [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com
>>
>> Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework")
>
> Linus, this is probably a better option in terms of what should go in to
> fix that commit.
>
>>
>> Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
>> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
>> Cc: Hans de Goede <hdegoede@redhat.com>
>> Cc: Jens Axboe <axboe@kernel.dk>
>> Signed-off-by: John Hubbard <jhubbard@nvidia.com>

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>> drivers/phy/marvell/phy-berlin-sata.c | 5 +++--
>> include/linux/phy/phy.h | 1 +
>> 2 files changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/marvell/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
>> index a91fc67fc4e0..d70ba9bc42d9 100644
>> --- a/drivers/phy/marvell/phy-berlin-sata.c
>> +++ b/drivers/phy/marvell/phy-berlin-sata.c
>> @@ -32,7 +32,7 @@
>>
>> /* register 0x01 */
>> #define REF_FREF_SEL_25 BIT(0)
>> -#define PHY_MODE_SATA (0x0 << 5)
>> +#define PHY_BERLIN_MODE_SATA (0x0 << 5)
>>
>> /* register 0x02 */
>> #define USE_MAX_PLL_RATE BIT(12)
>> @@ -102,7 +102,8 @@ static int phy_berlin_sata_power_on(struct phy *phy)
>>
>> /* set PHY mode and ref freq to 25 MHz */
>> phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
>> - 0x00ff, REF_FREF_SEL_25 | PHY_MODE_SATA);
>> + 0x00ff,
>> + REF_FREF_SEL_25 | PHY_BERLIN_MODE_SATA);
>>
>> /* set PHY up to 6 Gbps */
>> phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
>> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
>> index e8e118d70fd7..3f350e2749fe 100644
>> --- a/include/linux/phy/phy.h
>> +++ b/include/linux/phy/phy.h
>> @@ -42,6 +42,7 @@ enum phy_mode {
>> PHY_MODE_PCIE,
>> PHY_MODE_ETHERNET,
>> PHY_MODE_MIPI_DPHY,
>> + PHY_MODE_SATA
>> };
>>
>> /**
>>
>
>

\
 
 \ /
  Last update: 2019-01-14 14:44    [W:0.084 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site