lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 8/9] arm64: dts: sdm845: wireup the thermal trip points to cpufreq
Date
Since all cpus in the big and little clusters, respectively, are in the
same frequency domain, use all of them for mitigation in the
cooling-map. We end up with two cooling devices - one each for the big
and little clusters.

At the lower trip points we restrict ourselves to throttling only a few
OPPs. At higher trip temperatures, allow ourselves to be throttled to
any extent.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 177 ++++++++++++++++++++++++---
1 file changed, 161 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index fb7da678b116..7973e88bdf94 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/thermal/thermal.h>

/ {
interrupt-parent = <&intc>;
@@ -99,6 +100,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x0>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;

@@ -116,6 +118,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x100>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;

@@ -130,6 +133,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x200>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;

@@ -144,6 +148,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x300>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;

@@ -158,6 +163,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x400>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;

@@ -172,6 +178,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x500>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;

@@ -186,6 +193,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x600>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;

@@ -200,6 +208,7 @@
compatible = "qcom,kryo385";
reg = <0x0 0x700>;
enable-method = "psci";
+ #cooling-cells = <2>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 1>;

@@ -1719,18 +1728,35 @@
thermal-sensors = <&tsens0 1>;

trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 4>,
+ <&CPU1 THERMAL_NO_LIMIT 4>,
+ <&CPU2 THERMAL_NO_LIMIT 4>,
+ <&CPU3 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu0_crit>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};

cpu1-thermal {
@@ -1740,18 +1766,35 @@
thermal-sensors = <&tsens0 2>;

trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 4>,
+ <&CPU1 THERMAL_NO_LIMIT 4>,
+ <&CPU2 THERMAL_NO_LIMIT 4>,
+ <&CPU3 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu1_crit>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};

cpu2-thermal {
@@ -1761,18 +1804,35 @@
thermal-sensors = <&tsens0 3>;

trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 4>,
+ <&CPU1 THERMAL_NO_LIMIT 4>,
+ <&CPU2 THERMAL_NO_LIMIT 4>,
+ <&CPU3 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu2_crit>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};

cpu3-thermal {
@@ -1782,18 +1842,35 @@
thermal-sensors = <&tsens0 4>;

trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT 4>,
+ <&CPU1 THERMAL_NO_LIMIT 4>,
+ <&CPU2 THERMAL_NO_LIMIT 4>,
+ <&CPU3 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu3_crit>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};

cpu4-thermal {
@@ -1803,18 +1880,35 @@
thermal-sensors = <&tsens0 7>;

trips {
- cpu_alert4: trip0 {
+ cpu4_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit4: trip1 {
+ cpu4_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT 4>,
+ <&CPU5 THERMAL_NO_LIMIT 4>,
+ <&CPU6 THERMAL_NO_LIMIT 4>,
+ <&CPU7 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu4_crit>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};

cpu5-thermal {
@@ -1824,18 +1918,35 @@
thermal-sensors = <&tsens0 8>;

trips {
- cpu_alert5: trip0 {
+ cpu5_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit5: trip1 {
+ cpu5_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT 4>,
+ <&CPU5 THERMAL_NO_LIMIT 4>,
+ <&CPU6 THERMAL_NO_LIMIT 4>,
+ <&CPU7 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu5_crit>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};

cpu6-thermal {
@@ -1845,18 +1956,35 @@
thermal-sensors = <&tsens0 9>;

trips {
- cpu_alert6: trip0 {
+ cpu6_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit6: trip1 {
+ cpu6_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT 4>,
+ <&CPU5 THERMAL_NO_LIMIT 4>,
+ <&CPU6 THERMAL_NO_LIMIT 4>,
+ <&CPU7 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu6_crit>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};

cpu7-thermal {
@@ -1866,18 +1994,35 @@
thermal-sensors = <&tsens0 10>;

trips {
- cpu_alert7: trip0 {
+ cpu7_alert0: trip-point@0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};

- cpu_crit7: trip1 {
+ cpu7_crit: cpu_crit@0 {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT 4>,
+ <&CPU5 THERMAL_NO_LIMIT 4>,
+ <&CPU6 THERMAL_NO_LIMIT 4>,
+ <&CPU7 THERMAL_NO_LIMIT 4>;
+ };
+ map1 {
+ trip = <&cpu7_crit>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
};
};
--
2.17.1
\
 
 \ /
  Last update: 2019-01-14 11:22    [W:2.306 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site