Messages in this thread | | | Date | Mon, 14 Jan 2019 16:43:25 -0800 | From | Bjorn Andersson <> | Subject | Re: [PATCH v4 11/14] arm64: dts: qcom: pm8998: add interrupt controller properties |
| |
On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote:
> Add interrupt controller properties now that spmi-gpio is a proper > hierarchical IRQ chip. The interrupts property is no longer needed so > remove it. > > This change was not tested on any hardware but the same change was > tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with > no issues. >
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Brian Masney <masneyb@onstation.org> > --- > This is a new patch introduced in V4. > > arch/arm64/boot/dts/qcom/pm8998.dtsi | 28 ++-------------------------- > 1 file changed, 2 insertions(+), 26 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi > index f1025a50c227..43cb5ea14089 100644 > --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi > @@ -94,32 +94,8 @@ > reg = <0xc000>; > gpio-controller; > #gpio-cells = <2>; > - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, > - <0 0xc1 0 IRQ_TYPE_NONE>, > - <0 0xc2 0 IRQ_TYPE_NONE>, > - <0 0xc3 0 IRQ_TYPE_NONE>, > - <0 0xc4 0 IRQ_TYPE_NONE>, > - <0 0xc5 0 IRQ_TYPE_NONE>, > - <0 0xc6 0 IRQ_TYPE_NONE>, > - <0 0xc7 0 IRQ_TYPE_NONE>, > - <0 0xc8 0 IRQ_TYPE_NONE>, > - <0 0xc9 0 IRQ_TYPE_NONE>, > - <0 0xca 0 IRQ_TYPE_NONE>, > - <0 0xcb 0 IRQ_TYPE_NONE>, > - <0 0xcc 0 IRQ_TYPE_NONE>, > - <0 0xcd 0 IRQ_TYPE_NONE>, > - <0 0xce 0 IRQ_TYPE_NONE>, > - <0 0xcf 0 IRQ_TYPE_NONE>, > - <0 0xd0 0 IRQ_TYPE_NONE>, > - <0 0xd1 0 IRQ_TYPE_NONE>, > - <0 0xd2 0 IRQ_TYPE_NONE>, > - <0 0xd3 0 IRQ_TYPE_NONE>, > - <0 0xd4 0 IRQ_TYPE_NONE>, > - <0 0xd5 0 IRQ_TYPE_NONE>, > - <0 0xd6 0 IRQ_TYPE_NONE>, > - <0 0xd7 0 IRQ_TYPE_NONE>, > - <0 0xd8 0 IRQ_TYPE_NONE>, > - <0 0xd9 0 IRQ_TYPE_NONE>; > + interrupt-controller; > + #interrupt-cells = <2>; > }; > > }; > -- > 2.17.2 >
| |