lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/3] Input: atmel_mxt_ts: Wait for device be ready for communication
On Fri, Dec 14, 2018 at 04:12:13PM +0100, Paweł Chmiel wrote:
> According to documentation, device isn't ready for communication,
> until firmware asserts the CHG line. Add missing wait for this.
>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
> Changes from v1:
> - Fix checkpatch issues
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 55a107fc1b73..e8949c6ceafa 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -202,6 +202,7 @@ enum t100_type {
> #define MXT_CRC_TIMEOUT 1000 /* msec */
> #define MXT_FW_RESET_TIME 3000 /* msec */
> #define MXT_FW_CHG_TIMEOUT 300 /* msec */
> +#define MXT_POWERON_DELAY 150 /* msec */
>
> /* Command to unlock bootloader */
> #define MXT_UNLOCK_CMD_MSB 0xaa
> @@ -3070,6 +3071,16 @@ static int mxt_regulator_enable(struct mxt_data *data)
> msleep(MXT_REGULATOR_DELAY);
> gpiod_set_value(data->reset_gpio, 1);
> msleep(MXT_RESET_INVALID_CHG);
> +
> +retry_wait:
> + reinit_completion(&data->bl_completion);
> + data->in_bootloader = true;

I think you would want to reinit the ocmpletion and set the flag before
releasing reset line and sleeping, otherwise if interrupt fires too
early you'll be spinning for extra time.

I'd also really want to hear from Nick on this change.

> + error = mxt_wait_for_completion(data, &data->bl_completion,
> + MXT_POWERON_DELAY);
> + if (error == -EINTR)
> + goto retry_wait;
> +
> + data->in_bootloader = false;
> }
>
> return 0;
> --
> 2.17.1
>

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2019-01-15 01:42    [W:0.048 / U:5.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site