lkml.org 
[lkml]   [2019]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] tty: n_gsm: Add copy_config() and gsm_config() to prepare for serdev
Date
For supporting serdev drivers, we need to be able to configure n_gsm
from drivers. Let's prepare for that by adding copy_config() and
gsm_config() helper functions by moving the code around a bit.

Let's also unify the comments to keep checkpatch happy while at it.

Cc: linux-serial@vger.kernel.org
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Johan Hovold <johan@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/tty/n_gsm.c | 207 +++++++++++++++++++++++---------------------
1 file changed, 107 insertions(+), 100 deletions(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2214,6 +2214,111 @@ static struct gsm_mux *gsm_alloc_mux(void)
return gsm;
}

+static void gsm_copy_config_values(struct gsm_mux *gsm,
+ struct gsm_config *c)
+{
+ memset(c, 0, sizeof(*c));
+ c->adaption = gsm->adaption;
+ c->encapsulation = gsm->encoding;
+ c->initiator = gsm->initiator;
+ c->t1 = gsm->t1;
+ c->t2 = gsm->t2;
+ c->t3 = 0; /* Not supported */
+ c->n2 = gsm->n2;
+ if (gsm->ftype == UIH)
+ c->i = 1;
+ else
+ c->i = 2;
+ pr_debug("Ftype %d i %d\n", gsm->ftype, c->i);
+ c->mru = gsm->mru;
+ c->mtu = gsm->mtu;
+ c->k = 0;
+}
+
+static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
+{
+ int need_close = 0;
+ int need_restart = 0;
+
+ /* Stuff we don't support yet - UI or I frame transport, windowing */
+ if ((c->adaption != 1 && c->adaption != 2) || c->k)
+ return -EOPNOTSUPP;
+ /* Check the MRU/MTU range looks sane */
+ if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
+ return -EINVAL;
+ if (c->n2 < 3)
+ return -EINVAL;
+ if (c->encapsulation > 1) /* Basic, advanced, no I */
+ return -EINVAL;
+ if (c->initiator > 1)
+ return -EINVAL;
+ if (c->i == 0 || c->i > 2) /* UIH and UI only */
+ return -EINVAL;
+ /*
+ * See what is needed for reconfiguration
+ */
+
+ /* Timing fields */
+ if (c->t1 != 0 && c->t1 != gsm->t1)
+ need_restart = 1;
+ if (c->t2 != 0 && c->t2 != gsm->t2)
+ need_restart = 1;
+ if (c->encapsulation != gsm->encoding)
+ need_restart = 1;
+ if (c->adaption != gsm->adaption)
+ need_restart = 1;
+ /* Requires care */
+ if (c->initiator != gsm->initiator)
+ need_close = 1;
+ if (c->mru != gsm->mru)
+ need_restart = 1;
+ if (c->mtu != gsm->mtu)
+ need_restart = 1;
+
+ /*
+ * Close down what is needed, restart and initiate the new
+ * configuration
+ */
+
+ if (need_close || need_restart) {
+ int ret;
+
+ ret = gsm_disconnect(gsm);
+
+ if (ret)
+ return ret;
+ }
+ if (need_restart)
+ gsm_cleanup_mux(gsm);
+
+ gsm->initiator = c->initiator;
+ gsm->mru = c->mru;
+ gsm->mtu = c->mtu;
+ gsm->encoding = c->encapsulation;
+ gsm->adaption = c->adaption;
+ gsm->n2 = c->n2;
+
+ if (c->i == 1)
+ gsm->ftype = UIH;
+ else if (c->i == 2)
+ gsm->ftype = UI;
+
+ if (c->t1)
+ gsm->t1 = c->t1;
+ if (c->t2)
+ gsm->t2 = c->t2;
+
+ /*
+ * FIXME: We need to separate activation/deactivation from adding
+ * and removing from the mux array
+ */
+ if (need_restart)
+ gsm_activate_mux(gsm);
+ if (gsm->initiator && need_close)
+ gsm_dlci_begin_open(gsm->dlci[0]);
+ return 0;
+}
+
/**
* gsmld_output - write to link
* @gsm: our mux
@@ -2495,89 +2600,6 @@ static __poll_t gsmld_poll(struct tty_struct *tty, struct file *file,
return mask;
}

-static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
- struct gsm_config *c)
-{
- int need_close = 0;
- int need_restart = 0;
-
- /* Stuff we don't support yet - UI or I frame transport, windowing */
- if ((c->adaption != 1 && c->adaption != 2) || c->k)
- return -EOPNOTSUPP;
- /* Check the MRU/MTU range looks sane */
- if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
- return -EINVAL;
- if (c->n2 < 3)
- return -EINVAL;
- if (c->encapsulation > 1) /* Basic, advanced, no I */
- return -EINVAL;
- if (c->initiator > 1)
- return -EINVAL;
- if (c->i == 0 || c->i > 2) /* UIH and UI only */
- return -EINVAL;
- /*
- * See what is needed for reconfiguration
- */
-
- /* Timing fields */
- if (c->t1 != 0 && c->t1 != gsm->t1)
- need_restart = 1;
- if (c->t2 != 0 && c->t2 != gsm->t2)
- need_restart = 1;
- if (c->encapsulation != gsm->encoding)
- need_restart = 1;
- if (c->adaption != gsm->adaption)
- need_restart = 1;
- /* Requires care */
- if (c->initiator != gsm->initiator)
- need_close = 1;
- if (c->mru != gsm->mru)
- need_restart = 1;
- if (c->mtu != gsm->mtu)
- need_restart = 1;
-
- /*
- * Close down what is needed, restart and initiate the new
- * configuration
- */
-
- if (need_close || need_restart) {
- int ret;
-
- ret = gsm_disconnect(gsm);
-
- if (ret)
- return ret;
- }
- if (need_restart)
- gsm_cleanup_mux(gsm);
-
- gsm->initiator = c->initiator;
- gsm->mru = c->mru;
- gsm->mtu = c->mtu;
- gsm->encoding = c->encapsulation;
- gsm->adaption = c->adaption;
- gsm->n2 = c->n2;
-
- if (c->i == 1)
- gsm->ftype = UIH;
- else if (c->i == 2)
- gsm->ftype = UI;
-
- if (c->t1)
- gsm->t1 = c->t1;
- if (c->t2)
- gsm->t2 = c->t2;
-
- /* FIXME: We need to separate activation/deactivation from adding
- and removing from the mux array */
- if (need_restart)
- gsm_activate_mux(gsm);
- if (gsm->initiator && need_close)
- gsm_dlci_begin_open(gsm->dlci[0]);
- return 0;
-}
-
static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -2586,29 +2608,14 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,

switch (cmd) {
case GSMIOC_GETCONF:
- memset(&c, 0, sizeof(c));
- c.adaption = gsm->adaption;
- c.encapsulation = gsm->encoding;
- c.initiator = gsm->initiator;
- c.t1 = gsm->t1;
- c.t2 = gsm->t2;
- c.t3 = 0; /* Not supported */
- c.n2 = gsm->n2;
- if (gsm->ftype == UIH)
- c.i = 1;
- else
- c.i = 2;
- pr_debug("Ftype %d i %d\n", gsm->ftype, c.i);
- c.mru = gsm->mru;
- c.mtu = gsm->mtu;
- c.k = 0;
+ gsm_copy_config_values(gsm, &c);
if (copy_to_user((void *)arg, &c, sizeof(c)))
return -EFAULT;
return 0;
case GSMIOC_SETCONF:
if (copy_from_user(&c, (void *)arg, sizeof(c)))
return -EFAULT;
- return gsmld_config(tty, gsm, &c);
+ return gsm_config(gsm, &c);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
}
--
2.20.1
\
 
 \ /
  Last update: 2019-01-14 02:26    [W:0.120 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site