lkml.org 
[lkml]   [2019]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] powerpc: wii.dts: Add interrupt-related properties to GPIO node
Date
The Hollywood GPIO controller is connected to the Hollywood PIC (&PIC1)
at IRQs 10 and 11; IRQ 10 for GPIO lines that are configured for access
by the PPC, 11 for GPIO lines that are configured for access by the
ARM926.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
arch/powerpc/boot/dts/wii.dts | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
index 40fe791ec9e6..864e5a17aa1d 100644
--- a/arch/powerpc/boot/dts/wii.dts
+++ b/arch/powerpc/boot/dts/wii.dts
@@ -187,6 +187,11 @@
"DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3",
"DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7";

+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <10>;
+ interrupt-parent = <&PIC1>;
+
/*
* This is commented out while a standard binding
* for i2c over gpio is defined.
--
2.20.1
\
 
 \ /
  Last update: 2019-01-12 17:23    [W:0.043 / U:2.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site