lkml.org 
[lkml]   [2019]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/4] dt-bindings: mfd: max8998: Add charger subnode binding
From
Date
Hi,

On 5/1/18 16:43, Paweł Chmiel wrote:
> On Tuesday, May 1, 2018 2:45:40 PM CEST Sebastian Reichel wrote:
>> On Fri, Apr 27, 2018 at 06:03:02PM +0200, Paweł Chmiel wrote:
>>> This patch adds devicetree bindings documentation for
>>> battery charging controller as the subnode of MAX8998 PMIC.
>>> It's based on current behavior of driver.
>>>
>>> Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
>>> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
>>> ---
>>> Documentation/devicetree/bindings/mfd/max8998.txt | 22 ++++++++++++++++++++++
>>> 1 file changed, 22 insertions(+)

>>> --- a/Documentation/devicetree/bindings/mfd/max8998.txt
>>> +++ b/Documentation/devicetree/bindings/mfd/max8998.txt
>>> @@ -50,6 +50,21 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
>>> - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
>>> for buck2 regulator that can be selected using dvs gpio.
>>>
>>> +Charger: Configuration for battery charging controller should be added
>>> +inside a child node named 'charger'.
>>> + Required properties:
>>> + - max8998,charge-eoc: Setup "End of Charge". If value equals 0,
>>> + remain value set from bootloader or default value will be used.
>>> + Valid values: 0, 10 - 45
>>> +
>>> + - max8998,charge-restart: Setup "Charge Restart Level". If value equals 0,
>>> + remain value set from bootloader or default value will be used.
>>> + Valid values: -1, 0, 100, 150, 200

Perhaps change the property name to max8998,charge-restart-threshold,
in include/linux/mfd/max8998.h we have:

* @restart: Restart Level in mV: 100, 150, 200, and -1 for disable.
* If it equals 0, leave it unchanged.

Then we could make it an optional property:

- max8998,charge-restart-threshold: Charge restart threshold in millivolts.
Valid values are: 0, 100, 150, 200. If the value equals 0 the charger
restart will be disabled.

If the property is missing the charger restart threshold configuration would
be left unchanged.

>>> + - max8998,charge-timeout: Setup "Charge Full Timeout". If value equals 0,
>>> + remain value set from bootloader or default value will be used.
>>> + Valid values: -1, 0, 5, 6, 7
>>
>> What are those values? seconds?
>>
> Honestly i don't know. I've just documented values accepted currently
> by charger driver, so we can use it from devicetree.
> I couldn't find any max8998 datasheet with this information (units, possible
> values etc for those properties).

The charge timeout is in hours, as described in include/linux/mfd/max8998.h:


"* @timeout: Full Timeout in hours: 5, 6, 7, and -1 for disable.
* If it equals 0, leave it unchanged.
* Otherwise, leave it unchanged."

We could change description of the property to something along the lines of:

Optional properties:

- max8998,charge-timeout: Charge timeout in hours. Valid values are:
0, 5, 6, 7. If the value is 0 the charge timer will be disabled.

Then if the property is missing the driver will leave charge timer configuration
unchanged.

--
Regards,
Sylwester

\
 
 \ /
  Last update: 2019-01-10 18:48    [W:0.060 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site