lkml.org 
[lkml]   [2018]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] x86/pti/64: Remove the SYSCALL64 entry trampoline
On Mon, Sep 03, 2018 at 03:59:44PM -0700, Andy Lutomirski wrote:
> The SYSCALL64 trampoline has a couple of nice properties:
>
> - The usual sequence of SWAPGS followed by two GS-relative accesses to
> set up RSP is somewhat slow because the GS-relative accesses need
> to wait for SWAPGS to finish. The trampoline approach allows
> RIP-relative accesses to set up RSP, which avoids the stall.
>
> - The trampoline avoids any percpu access before CR3 is set up,
> which means that no percpu memory needs to be mapped in the user
> page tables. This prevents using Meltdown to read any percpu memory
> outside the cpu_entry_area and prevents using timing leaks
> to directly locate the percpu areas.
>
> The downsides of using a trampoline may outweigh the upsides, however.
> It adds an extra non-contiguous I$ cache line to system calls, and it
> forces an indirect jump to transfer control back to the normal kernel
> text after CR3 is set up. The latter is because x86 lacks a 64-bit
> direct jump instruction that could jump from the trampoline to the entry
> text. With retpolines enabled, the indirect jump is extremely slow.
>
> This patch changes the code to map the percpu TSS into the user page
> tables to allow the non-trampoline SYSCALL64 path to work under PTI.
> This does not add a new direct information leak, since the TSS is
> readable by Meltdown from the cpu_entry_area alias regardless. It
> does allow a timing attack to locate the percpu area, but KASLR is
> more or less a lost cause against local attack on CPUs vulnerable to
> Meltdown regardless. As far as I'm concerned, on current hardware,
> KASLR is only useful to mitigate remote attacks that try to attack
> the kernel without first gaining RCE against a vulnerable user
> process.
>
> On Skylake, with CONFIG_RETPOLINE=y and KPTI on, this reduces
> syscall overhead from ~237ns to ~228ns.
>
> There is a possible alternative approach: we could instead move the
> trampoline within 2G of the entry text and make a separate copy for
> each CPU. Then we could use a direct jump to rejoin the normal
> entry path.
>
> Signed-off-by: Andy Lutomirski <luto@kernel.org>

The following commit should also be reverted:

4d99e4136580 ("perf machine: Workaround missing maps for x86 PTI entry trampolines")

--
Josh

\
 
 \ /
  Last update: 2018-09-07 18:41    [W:0.143 / U:2.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site