lkml.org 
[lkml]   [2018]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V12 00/14] Krait clocks + Krait CPUfreq
From


On 7 September 2018 10:57:34 BST, Sricharan R <sricharan@codeaurora.org> wrote:
>Hi Craig,
>
>
>>> [v12]
>>> * Added my signed-off that was missing in some patches.
>>> * Added Bjorn's acked that i missed earlier.
>>>
>>
>> Can you give this a try on your 8974 device and check if the
>> pvs version reporting, scaling for higher frequencies are fine ?
>> Sorry, i could not get hold of a 8974 device. So in-case if you
>still
>> have the issues with higher frequencies, can you give a quick debug
>> and report. That would be of great help.
>>
> Ping on this ..

Hi, didn't see your last message,

Will have a try on mine in the weekend and report back.
>
>Regards,
> Sricharan
>
>> Regards,
>> Sricharan
>>
>>
>>> [v11]
>>> * Dropped patch 13 and 14 from v10 and
>>> merged the qcom-cpufreq-krait driver to the existing
>qcom-cpufreq-kryo.c
>>> * Rebased on top of clk-next
>>> * Fixed a bug while populating the pvs version for krait.
>>>
>>> [v10]
>>> * Addressed Stephen's comments to add clocks bindings properties
>>> to the newly introduced nodes.
>>> * Added a change to include opp-supported-hw to qcom-cpufreq.c
>>> * Rebased on top of clk-next
>>> * Although there were minor changes to bindings and the driver
>>> retained the acked-by tags from Rob and Viresh respectively.
>>>
>>> [v9]
>>> * Fixed a rebase issue in Makefile and added Tag from Robh.
>>>
>>> [v8]
>>> * Fixed a bug in path#14 pointed out by Viresh and also added
>tags.
>>> No change in any other patch.
>>>
>>> [v7]
>>> * Fixed comments from Viresh for cleaning up the error handling
>>> in qcom-cpufreq.c. Also changed the init function to lateinit
>>> call. This is required because nvmem which gets initialised with
>>> module_init needs to go first.
>>> * Fixed Rob's comments for bindings documentation
>>> * Fixed kbuild build issue in clk-lpc32xx.c
>>> * Rebased on top of clk-next
>>>
>>> [v6]
>>> * Adrressed comments from Viresh for patch #14 in v5 [5]
>>> * Introduced a new binding operating-points-v2-krait-cpu
>>> as per discussion with Rob
>>> * Added Review tags
>>>
>>> [v5]
>>> * Addressed comments from Rob for bindings
>>> * Addressed comments from Viresh to use dev_pm_opp_set_prop_name,
>accordingly
>>> dropped patch #12 and corrected patch #11 from previous patch
>set in [4]
>>> * Converted to use #spdx tags for newly introduced files
>>>
>>> Mostly a resend of the v3 posted by Stephen quite some time back [1]
>>> except for few changes.
>>> Based on reading some feedback from list,
>>> * Dropped the patch "clk: Add safe switch hook" from v3 [2].
>>> Now this is taken care by patch#10 in this series only for
>Krait.
>>> * Dropped the path "clk: Avoid sending high rates to downstream
>>> clocks during set_rate" from v3 [3].
>>> * Rebased on top of clk-next.
>>> * Dropped the DT update from the series. Will send separately
>>> * Now with cpufreq-dt+opp supporting voltage scaling, registering
>the
>>> krait cpu supplies in DT should be sufficient. But one issue is,
>>> the qcom-cpufreq drivers reads the efuse and based on that
>registers
>>> the opp data and then registers the cpufreq-dt device. So when
>>> cpufreq-dt driver probes and registers the regulator to the OPP
>framework,
>>> it expects that the opp data for the device should not be
>registered before
>>> the regulator. Will send a RFC patch removing that check, to
>find out the
>>> right way of doing it.
>>>
>>> These patches provide cpufreq scaling on devices with Krait CPUs.
>>> In Krait CPU designs there's one PLL and two muxes per CPU, allowing
>>> us to switch CPU frequencies independently.
>>>
>>> secondary
>>> +-----+ +
>>> | QSB |-------+------------|\
>>> +-----+ | | |-+
>>> | +-------|/ |
>>> | | + |
>>> +-----+ | | |
>>> | PLL |----+-------+ | primary
>>> +-----+ | | | +
>>> | | +-----|\ +------+
>>> +-------+ | | | \ | |
>>> | HFPLL |----------+-----------------| |-----| CPU0 |
>>> +-------+ | | | | | | |
>>> | | | +-----+ | / +------+
>>> | | +-| / 2 |---------|/
>>> | | +-----+ +
>>> | | secondary
>>> | | +
>>> | +------------|\
>>> | | |-+
>>> +---------------|/ | primary
>>> + | +
>>> +-----|\ +------+
>>> +-------+ | \ | |
>>> | HFPLL |----------------------------| |-----| CPU1 |
>>> +-------+ | | | | |
>>> | +-----+ | / +------+
>>> +-| / 2 |---------|/
>>> +-----+ +
>>>
>>> To support this in the common clock framework we model the muxes,
>>> dividers, and PLLs as different clocks. CPUfreq only interacts
>>> with the primary mux (farthest right in the diagram). When CPUfreq
>>> sets a rate, the mux code finds the best parent that can provide the
>rate.
>>> Due to the design, QSB and the top PLL are always a fixed rate and
>thus
>>> only support one frequency each. These sources provide the lowest
>>> frequencies for the CPUs. The HFPLLs are where we can make the CPU
>go
>>> faster (GHz range). Sometimes we need to run the HFPLL twice as
>>> fast and divide it by two to get a particular frequency.
>>>
>>> When switching rates we can't leave the CPU clocked by the HFPLL
>because
>>> we need to turn off the output of the PLL when changing its
>frequency.
>>> This means we have to switch over to the secondary mux and use one
>of the
>>> fixed sources. This is why we need something like the safe parent
>patch.
>>>
>>> [1]
>http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332607.html
>>> [2]
>http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332615.html
>>> [3]
>http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332608.html
>>> [4] https://lwn.net/Articles/740994/
>>> [5] https://lkml.org/lkml/2017/12/19/537
>>>
>>>
>>> Sricharan R (3):
>>> clk: qcom: Add safe switch hook for krait mux clocks
>>> cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem
>>> based qcom socs
>>> cpufreq: qcom: Add support for krait based socs
>>>
>>> Stephen Boyd (11):
>>> ARM: Add Krait L2 register accessor functions
>>> clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
>>> clk: qcom: Add HFPLL driver
>>> dt-bindings: clock: Document qcom,hfpll
>>> clk: qcom: Add MSM8960/APQ8064's HFPLLs
>>> clk: qcom: Add IPQ806X's HFPLLs
>>> clk: qcom: Add support for Krait clocks
>>> clk: qcom: Add KPSS ACC/GCC driver
>>> dt-bindings: arm: Document qcom,kpss-gcc
>>> clk: qcom: Add Krait clock controller driver
>>> dt-bindings: clock: Document qcom,krait-cc
>>>
>>> .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 19 +
>>> .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 44 +++
>>> .../devicetree/bindings/clock/qcom,hfpll.txt | 60 ++++
>>> .../devicetree/bindings/clock/qcom,krait-cc.txt | 34 ++
>>> .../{kryo-cpufreq.txt => qcom-nvmem-cpufreq.txt} | 7 +-
>>> arch/arm/common/Kconfig | 3 +
>>> arch/arm/common/Makefile | 1 +
>>> arch/arm/common/krait-l2-accessors.c | 48 +++
>>> arch/arm/include/asm/krait-l2-accessors.h | 9 +
>>> drivers/clk/qcom/Kconfig | 28 ++
>>> drivers/clk/qcom/Makefile | 5 +
>>> drivers/clk/qcom/clk-hfpll.c | 244
>+++++++++++++
>>> drivers/clk/qcom/clk-hfpll.h | 44 +++
>>> drivers/clk/qcom/clk-krait.c | 126 +++++++
>>> drivers/clk/qcom/clk-krait.h | 40 +++
>>> drivers/clk/qcom/gcc-ipq806x.c | 82 +++++
>>> drivers/clk/qcom/gcc-msm8960.c | 172 +++++++++
>>> drivers/clk/qcom/hfpll.c | 96 +++++
>>> drivers/clk/qcom/kpss-xcc.c | 87 +++++
>>> drivers/clk/qcom/krait-cc.c | 397
>+++++++++++++++++++++
>>> drivers/cpufreq/Kconfig.arm | 6 +-
>>> drivers/cpufreq/Makefile | 2 +-
>>> drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
>>> drivers/cpufreq/qcom-cpufreq-kryo.c | 232
>------------
>>> drivers/cpufreq/qcom-cpufreq-nvmem.c | 387
>++++++++++++++++++++
>>> include/dt-bindings/clock/qcom,gcc-msm8960.h | 2 +
>>> 26 files changed, 1941 insertions(+), 239 deletions(-)
>>> create mode 100644
>Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
>>> create mode 100644
>Documentation/devicetree/bindings/clock/qcom,hfpll.txt
>>> create mode 100644
>Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
>>> rename Documentation/devicetree/bindings/opp/{kryo-cpufreq.txt =>
>qcom-nvmem-cpufreq.txt} (98%)
>>> create mode 100644 arch/arm/common/krait-l2-accessors.c
>>> create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
>>> create mode 100644 drivers/clk/qcom/clk-hfpll.c
>>> create mode 100644 drivers/clk/qcom/clk-hfpll.h
>>> create mode 100644 drivers/clk/qcom/clk-krait.c
>>> create mode 100644 drivers/clk/qcom/clk-krait.h
>>> create mode 100644 drivers/clk/qcom/hfpll.c
>>> create mode 100644 drivers/clk/qcom/kpss-xcc.c
>>> create mode 100644 drivers/clk/qcom/krait-cc.c
>>> delete mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
>>> create mode 100644 drivers/cpufreq/qcom-cpufreq-nvmem.c
>>>
>>

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

\
 
 \ /
  Last update: 2018-09-07 16:30    [W:0.137 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site