lkml.org 
[lkml]   [2018]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 0/2] Initial Allwinner V3s CSI Support
Hi Yong,

On Wed, Jun 20, 2018 at 12:45:03PM +0800, Chen-Yu Tsai wrote:
> On Wed, May 30, 2018 at 5:19 PM, Sakari Ailus
> <sakari.ailus@linux.intel.com> wrote:
> > On Tue, May 29, 2018 at 11:57:57AM +0200, Maxime Ripard wrote:
> >> On Thu, May 17, 2018 at 11:02:24AM +0200, Maxime Ripard wrote:
> >> > On Fri, May 04, 2018 at 02:44:08PM +0800, Yong Deng wrote:
> >> > > This patchset add initial support for Allwinner V3s CSI.
> >> > >
> >> > > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> >> > > interface and CSI1 is used for parallel interface. This is not
> >> > > documented in datasheet but by test and guess.
> >> > >
> >> > > This patchset implement a v4l2 framework driver and add a binding
> >> > > documentation for it.
> >> > >
> >> > > Currently, the driver only support the parallel interface. And has been
> >> > > tested with a BT1120 signal which generating from FPGA. The following
> >> > > fetures are not support with this patchset:
> >> > > - ISP
> >> > > - MIPI-CSI2
> >> > > - Master clock for camera sensor
> >> > > - Power regulator for the front end IC
> >> >
> >> > I tested it on my H3 with a parallel camera, and it still works. Thanks!
> >> >
> >> > Hans, Sakari, any chance this might land in 4.18?
> >>
> >> Ping?
> >
> > I'll try to look into this soonish but it seems to be too late for 4.18.
> > Sorry about that.
>
> Can we get this into 4.19?

Did you have some time to make the changes Sakari asked for? That
would be great to have it in 4.20.

Thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-07 15:24    [W:0.087 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site